MAINS CONNECTIONS
Your amplifier has been factory set to the correct mains voltage for your country. The voltage setting is marked on the serial badge, located on the rear panel. Check that this complies with your local supply.
Export units for certain markets have a moulded mains plug fitted to comply with local requirements. If your unit does not have a plug fitted the colored wires should be connected to the appropriate plug terminals in accordance with the following code.
GREEN/YELLOW | EARTH | terminal |
BLUE | NEUTRAL | terminal |
BROWN | LIVE | terminal |
As the colors of the wires in the mains lead may not correspond with the colored marking identifying the terminals in your plug proceed as follows;
The wire which is colored GREEN/YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or colored GREEN or GREEN and YELLOW.
The wire which is colored BLUE must be connected to the terminal in the plug which is marked by the letter N or colored BLACK.
The wire which is colored BROWN must be connected to the terminal in the plug which is marked by the letter L or colored RED.
DO NOT CONNECT/SWITCH ON THE MAINS SUPPLY UNTIL ALL OTHER CONNEC- TIONS HAVE BEEN MADE.
