INSTALLATION

English

COAXIAL

DIGITAL OUTPUT

RL

ANALOG

OUT

IN OUT

REMOTE

CONTROL

1 2 3

Connections

1Digital Out

This output supplies digital signal and can therefore only be connected to an input which is suitable for this signal. Use here a lead with one cinch plug on either end.

Never connect this socket to a non-digital input of an amplifier, such as AUX, CD, TAPE, PHONO etc!

2Analog Out

For the connecting cable to the amplifier.

Insert a red plug into the ‘R’ socket and the other plug into the ‘L’ socket.

Insert the two other plugs into the corresponding sockets of the CD or AUX input of your amplifier. You can also use the TUNER or TAPE IN connection, but never the PHONO input!

3Remote Control

For connecting up the equipment when you are incorporating the changer in a HiFi system with its own remote control system.

Connecting Headphones (for CC4000 & CC4000OSE only)

Connect headphones with a 6.3 mm jack plug to the PHONES socket.

The sound level is adjusted with the LEVEL control.

PHONES/

LEVEL

Note:

The volume control on the remote control must not be at the minimum level.

7

Page 7
Image 7
Marantz CC3000 manual Installation, Connections, Connecting Headphones for CC4000 & CC4000OSE only