USING HEADPHONES / EARPHONES
• Turn down the volume before connecting headphones / earphones to the unit, then adjust the volume to your desired level.
• When headphones / earphones are connected, no sound will come from the front speakers.
NOTE
Excessive sound pressure from headphones / earphones can cause hearing loss.
INSTALLATION
INSTALLING / REMOVING THE BASE STAND
WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. Do NOT exert pressure on the front of the unit at any time because the screen could crack.
1. Disconnect all cables or cords connected to the unit.
2. Lay the unit down on a flat surface with the back side facing up. Please make sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen.
3. To install the base stand, place the base stand on the mounting slot, push the stand till it locks.
4.To remove the base stand, keep pressing the locking area of the base stand and pull downwards to release the base stand.
Press and pull downwards
MOUNTING THE TV UNIT
1) Mark the correct mounting position on the wall.
2) Insert a fixing screw(s) at the marked position on the wall.
3) Align the slot hole(s) of the speaker over the screw and pull the TV downward until it is firmly hooked.
NOTE
Remove the base stand before mounting the unit on the wall.
E - 9
PLV76156S7_ENG_IB_UL_091221.indd 9 | 12/22/2009 10:46:14 |
