ADVANCED OPERATIONS
•Program edit
This procedure allows you to record tracks in any desired order while fitting the tracks into a specified tape length.
1.Program tracks according to the programming procedure in section “PROGRAM PLAY” (page 17).
2.The rest of the program edit procedure is the same as step 1 to 3 in the simple edit procedure.
•Delete program edit
When recording from a disc to a tape, this procedure allows you to omit the tracks you do not want to record, while fitting the tracks into a specified tape length.
1.Program tracks according to the “delete programming” procedure in the “PROGRAM PLAY” section (page 19).
2.The rest of the delete program edit procedure is the same as step 1 to 3 in the simple edit procedure.
Note:
•During the simple edit play, program edit play and delete program edit play, any operations other than the STOP, OPEN/CLOSE and TIME Display OFF buttons are disabled. This is intended to prevent mistakes in recording due to erroneous operation.
•While editing, remote control operations are disabled.
•The display is always in the time display mode during edit play. It is not possible to switch to the text display mode.
•Start Edit Recording
Before start editing, connect remote control input of Marantz cassette deck with remote control output of CD5001 by remote control cable.
Reverse mode switch may be set to any of one side ( 
), both sides ( 
) and continuous play ( 
).
-Synchro recording with Marantz auto reverse cassette deck set to both sides ( 
) or continuous play ( 
) mode.
1.After setting up, setup the cassette deck to rec pause state.
2.Press 3or 8buttons of the player to start A side program. The player sends out signal to start recording and starts playing A side program after 4 seconds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TTL |
|
| TRK |
|
|
| A – |
|
|
| EDIT | TTL | TIME | ||
TEXT | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 12 | 13 14 | 15 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.After A side program complete, player turns to the pause state at the beginning of B side program.
TTL | TRK | B | EDIT | TTL TIME |
TEXT |
|
| 16 | 17 18 19 20 |
Total number of tracks on side B |
| Total playing time | ||
of side B
Number indicators of tracks assigned to side B light up.
4.When A side of the tape ends up, cassette deck inverts its recording direction and set to rec pause state automatically.
5.Press 3or 8buttons of the player manually to start B side recording. Player sends out signal to restart recording and starts playing B side program after 4 seconds.
6.After B side program complete, player stops playing and clears edit program automatically.
Note:
•If the tape ends up before edit program of one side completes, for example by wrong tape length have chosen, cassette deck send out signal to player to let the player cancel the rest of program. Player jumps to the beginning of B side if it was A side or stop playing and clear edit program if it was B side.
•Synchro recording can be started only when a Marantz autoreverse cassette deck (ex. SD4050 etc.) with synchro recording compatibility is connected to the CD player.
•Synchro recording is performed through the remote line connection (rear panel jacks).
ENGLISH
23
