Installation, Digital Optical connections, D-Busconnection

ENGLISH

INSTALLATION

tic cable, available from your supplier) the CD-Recorder to a

Digital Optical connections

For recording and playing, connect (using the suitable fiber-op-

digital amplifier or other equipments based on the diagram be-

low. Before connection the cables, remove the dust caps from

the digital optical connections. We recommend that you save

the caps.

	OPTICAL
	CDR/CD	CD
INPUT	OUTPUT
7		8	9
O U T P U T		I N P U T	I N P U T

Amplifier 1			Amplifier 2

1For external recording, connect a fiber-optic cable u be- tween the DIGITAL OPTICAL INPUT of the CD-Recorder and the DIGITAL OPTICAL OUTPUT of an external ampli- fier or CD player.

2For playback, connect cable i between the OPTICAL CD/

CDR OUTPUT-socket on the CD-Recorder and the DIG- ITAL OPTICAL INPUT-socket of an amplifier e.g. CD or AUX.

3For DJ-Mode playback (See page 15), connect a fiber-optic cable o between the OPTICAL CD OUTPUT-socket on the CD-Recorder and the DIGITAL OPTICAL INPUT- socket of an amplifier e.g. CD or AUX.

-DJ-Mode playback is the function that the deck 1 and the deck 2 on this CD-Recorder can play the songs separately at the same time.

Note:

For playback, the digital coaxial outputs or analog outputs of the CD Player and CD-Recorder should be connected to an amplifier

D-BUS CONNECTION

Remote control cable connections

By connecting DR6050 to the Marantz amplifier using a D-BUS remote control cable 0, you can operate the operations of DR6050 from the remote control of the amplifier. Set the re- mote control selector to ‘EXTERNAL’.

REMOTE

CONTROL