![USING THE RECORDER](/images/new-backgrounds/18224/1822423x1.webp)
USING THE RECORDER
The numbers between parentheses refer to the
Switching ON and OFF |
| Inserting discs |
|
|
|
ENGLISH
1 Connect the power cord into the mains.
AC IN
q
2Press the POWER ON/OFF (1) button on the front of the
1Press / OPEN/CLOSE to open the disc tray.
➔ lights up.
2 Insert a CD,
CD RECORDER DR6050 | the tray, label side up. |
| Recordable |
|
| 3 Press / OPEN/CLOSE to close the tray. |
| |
| ReWritable |
|
|
| ||
STANDBY |
|
| ➔ | lights up, followed by | and the dis- | |
POWER | STOP | PLAY/PAUSE | CLOSE | |||
ON/OFF |
| OPEN/ |
|
|
| |
| REC |
| CDR |
| play will show the type of disc you inserted. | |
|
|
|
|
|
w
Using the remote control
1Open the battery compartment cover.
2Insert 2 batteries (AA,
3Replace the cover.
•If a
•If
Note:
-We recommend you use 2 batteries of the same type and condition.
-Always point the remote control directly towards the re- corder and make sure there.
This remote control can switch “STANDBY ON/OFF” but can- not switch “POWER ON/OFF” the
Batteries contain chemical substances, so they should be disposed of properly.
Note:
-Only Audio CDs will be accepted. If a
inserted, the display shows | . |
-For recording it is important that the blank disc is completely free from dust particles or scratches. (see Compact Discs page 1).
-If you insert a blank or
recording. During this process the display will first show and then the number of audio tracks.
Calibration can take up to 25 seconds.
7