Marantz DV4100 manual Preparation, General notes, Connecting to a TV, Video Y/C connection

ENGLISH

Preparation

General notes

-Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Possible connections are shown in the following drawings.

-Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

-Do not connect your DVD-player via your VCR. The video quality could be distorted by the copy protection system.

-For better sound reproduction, connect the player’s audio out jacks to the audio in jacks of your amplifier, receiver, stereo or A/V equipment. See ‘Connecting to optional equipment’.

Caution: Do not connect the player’s audio out jack to the phono in jack of your audio system.

Connecting to a TV

TV

●Connect the Euroconnector to the corresponding connector on the

TV using the Euroconnector cable supplied (A).

If your TV is not equipped with a Euroconnector you can select one of the following alternative connections:

D C B A

	I
	AUX/VCR
DIGITAL AUDIO OUT	IN
	STEREO OUT
PCM/MPEG2/AC3/DTS

II

TV OUT

		R	L	(CVBS)	(Y/C)
OPT OUT	DIG OUT	AUDIO OUT		VIDEO OUT	S-VIDEO OUT

S-Video (Y/C) connection

1Connect the S-Video jack on the DVD-player to the S-Video in jack on the TV using an optional S-Video cable (B).

2Connect the audio Left and Right out jacks to the audio left/right in jacks on the TV (D).

Video CVBS connection

1Connect the Video out (CVBS) jack to the video in jack on the TV using the audio/video cable supplied (C).

2Connect the audio Left and Right out jacks to the audio left/right in jacks on the TV (D).

14PREPARATION