Marantz DV4300 manual Rear Panel, Digital OUT Optical, Digital OUT Coaxial, Audio OUT, Video OUT

ENGLISH

Rear Panel

z x c v b n

VIDEO	Y	CB / PB	CR / PR
L

					COMPONENT
		R			EXTERNAL
			S-VIDEO		SERIAL NO.
OPTICAL	COAXIAL			IN	OUT
		AUDIO	VIDEO		INTERNAL
DIGITAL OUTPUT		OUTPUT	OUTPUT	REMOTE CONTROL
			m ,		.

zDIGITAL OUT (OPTICAL)

Connects digital audio under play mode into an AV amplifier or a receiver equipped with digital audio decoder for you to enjoy the theatre-quality sound in your home.

Note

•Remove the dust protection cap from the optical digital audio output connector and connect the cable firmly so that the configurations of both the cable and connector match.

•Do not connect to the digital audio input of an amplifier that does not have Dolby Digital and dts decoder when you set the digital out option of setup information to BITSTREAM.

xDIGITAL OUT (COAXIAL)

Connects digital audio under play mode into an AV amplifier or a receiver equipped with digital audio decoder for you to enjoy the theatre-quality sound in your home.

cAUDIO OUT

Analogue 2 channel (L/R) audio output in order to connect to a TV or stereo amplifier.

vVIDEO OUT

Connects composite video signal to Composite Video input con- nector of TV or monitor to achieve high fidelity colour reproduc- tion.

bCOMPONENT VIDEO OUT (480i or 480p)

Connects component video signal to component video input connector on TV, if your TV supports interlace video input (480i) or Progressive video input (480p).

nAC in power cord connection terminal

Creates POWER between wall outlet and the unit.

mS-VIDEO OUT

Connects to TV or monitor equipped with S-VIDEO input. In order to achieve a sharper and cleaner picture than that when connected via VIDEO OUT (composite video).

,System Control in / out jack

Connect this DVD player to another Marantz Component, to operate the components as a single system (page 9).

.System Control external / internal switch

When using this DVD player independently, set this switch to “INTERNAL” (page 9).

12