Marantz DV4610 manual Method, Connection to an Audio System, Analog

CONNECTIONS

The following show examples of connections commonly used to connect the DVD player to the TV and other components.

If using this DVD player to play back a DVD in a Dolby Digital 5.1 channel surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambi- ence with powerful and high-quality surround sound of a professional standard, which can be heard in movie theatres. Use an audio coaxial digital or optical cable (commercially available) for the audio connections.

NOTES:

•Be sure to turn off the power of all components in the system before connecting another component.

•Refer to the instruction manuals for your TV, Stereo system and any other components to be connected to the DVD player.

Connection to an Audio System

English

Method 1

Stereo system

AUDIO Audio Input

Jacks

Audio Cable

(supplied)

DVD	AUDIO OUT
	(Analog)

Method 2

Dolby Digital decoder,

DTS decoder

or

MPEG decoder

Digital Audio

Input Jacks

Optical Cable		Audio Coaxial
		Digital Cable
(commercially	or
		(commercially
available)
		available)

DIGITAL OUT

•Method 1 DVD Player + Stereo system

•Method 2 DVD Player + Dolby Digital decoder, DTS decoder or MPEG decoder

NOTES (for method 2 only):

•When using an AV amplifier with a built-in decoder (Dolby Digital, DTS, or MPEG decoder) as shown in the Method 2, set

“DOLBY DIGITAL”, “DTS” or “MPEG” to “BITSTREAM” accordingly for audio output in the setup menu (refer to page 25). Set it to “PCM” or “OFF” for the decoder that is not used currently. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

•The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD deck or DAT deck.

•Set “DOLBY DIGITAL” and “MPEG” to “PCM”, and “DTS” to “OFF” for audio output in the setup menu for connecting to an MD deck or DAT deck (refer to page 25).

•Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a decoder, etc., that is not DTS-compatible.

Optical cable (not supplied)

•Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diameter of 15 cm or more when storing them.

•Use a cable which is 3m or shorter.

•Insert cable plugs firmly into the connectors when making connections.

•If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.

– 13 – EN