Marantz DV4610 Method Basic Good Audio picture Better Picture Best picture, Connector Video OUT

CONNECTIONS

Connection to a TV (for Video)

Method 1

Basic Good

Audio picture

Method 2

Better

picture

Method 3

Best picture

COMPONENT

				21-pin Scart jack	VIDEO IN
R	L	VIDEO IN	S-VIDEO IN	CR/PR	Y	CB/PB

TV

				Component
				Video Cable
				(commercially
				available)
Audio Cable	Video Cable	S-Video Cable	Euro Audio/Video Cable	or
(supplied)	(supplied)	(commercially	(commercially available)
		available)

DVD

AUDIO OUT VIDEO OUT S-VIDEO OUT	A/V EURO	COMPONENT
(Analog)	CONNECTOR	VIDEO OUT

•Method 1 DVD Player + TV with Video input jack

•Method 2 DVD Player + TV with S-Video input terminal

•Method 3 DVD Player + TV with AV1 (21-pin Scart) jack or Component Video input jacks

NOTES:

•Connect the DVD player directly to a TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection system.

•S-Video output terminal

The video signals are divided into colour (C) and brightness (Y) signals, achieving a clearer picture.

If the TV is equipped with an S-Video input terminal, we recommend connecting it to this unit’s S-Video output terminal using a commercially available S-Video connection cord.

HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS

If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD

player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator (not includ- ed). Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna termi- nal on your TV. Follow the instruction supplied with the RF Modulator for more details.

If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.

NOTE:

•The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator.

– 14 – EN