Marantz DV6500 manual Panel display, Displays During Operation, Using the remote control, Sacd

FUNCTIONAL OVERVIEW

Panel display

Lights up when the	Lights up when the		Lights up when a				Lights up when the
			Super Audio CD is				progressive scan
A-B repeat function is on. repeat function is on.
			inserted on the disc tray.				system is activated.
Lights up when the ALL								Displays a type of the disc which is
repeat function is on.		GROUP				SACD		inserted on the tray or the disc status.
					P.SCAN			• DVD: DVD
					DVD A			• DVD A: DVD-Audio
Lights up when the						M		• M: Playing the MULTI-CH AREA of
								Super Audio CD
inserted disc comes						VCD		• CD: Audio CD, MP3, JPEG, WMA
to a pause.
								• VCD: Video CD
Lights up when playing back				Displays the elapsed time of the title
in slow mode. (DVD, VCD)	Lights up when the inserted			or track. The number of a new title,

disc is being played back.	chapter, or track is displayed when
	a chapter or track is switched.

English

Displays During Operation

Power on

No disc inserted or cannot read

Tray open

Tray closed

Loading the Disc

Lights up when the playback control is activated (VCD)

Power off

Using the remote control

Keep in mind the following when using the remote control:

•Make sure that there is no obstacle between the remote and the remote sensor on the unit.

•Use within the operating range and angle, as shown.

60

Loading the Batteries

1. Open the battery compartment cover.

2. Insert two “AA” (R6P) batteries, with each one oriented correctly.

3. Close the cover.

Cautions On Batteries

•Use “AA” (R6P) batteries in this remote control unit.

•Replace the batteries with new ones approximately once a year, though this depends on the frequency with which the remote control unit is used.

•If the remote control unit does not operate from close to the main unit, replace the batteries with new ones, even if less then a year has passed.

•The included batteries are only for verifying operation. Replace them with new batteries as soon as possible.

•When inserting the batteries, be careful to do so in

the proper direction, following the and marks in the remote control unit’s battery compartment.

•To prevent damage or battery fluid leakage:

•Do not use a new battery with an old one.

•Do not use two different types of batteries such as alkaline and manganese.

•Do not short-circuit, disassemble, heat or dispose of batteries in flames.

•Remove the batteries when not planning to use the remote control unit for a long period of time.

•If the batteries should leak, carefully wipe off the fluid from the inside of the battery compartment, then insert new batteries.

– 11 – EN