Marantz DV6500 manual Audio Setting, Speaker Setting, Speaker Size, Quick, Delay Time

• CUSTOM mode will appear.

DVD SETUP

Audio Setting

Choose the appropriate Audio settings for your equipment as it only affect during the playback of DVD discs of the DVD play- er.

1Press the SETUP button in stop mode.

2Press the Cursor buttons ( s or B ) to select CUSTOM, then press the ENTER button.

SPEAKER SIZE

• Press the Cursor buttons (K or	AUDIO
	SPEAKER SIZE
) to select the speaker to set.	CENTER	LARGE
L	FRONT (L/R)	LARGE
	SUB WOOFER	ON

SURROUND (L/R) LARGE

•Press Enter until the desired speaker size appears.

English

3 Press the Cursor buttons ( s or B ) to select AUDIO, then the ENTER button to confirm.

4 Press the Cursor buttons ( K or L ) button to select the below items, then press the ENTER button.

DRC (Dynamic Range Control) (Default : ON)

•To compress the range of sound volume.

•DRC function is available only on the discs that are recorded in the Dolby Digital format.

DOWN SAMPLING (Default : ON)

•Set to ON when outputting in 48kHz.

•This function is available only on digital outputting of a disc record- ed in 96 kHz.

AUDIO

DRC	ON
DOWN SAMPLING	ON
DOLBY DIGITAL	ON
DTS	PCM
ANALOG	2.0 CH
AUDIO
DRC	ON
DOWN SAMPLING	ON
DOLBY DIGITAL	ON
DTS	PCM
ANALOG	2.0 CH
AUDIO
DRC	ON
DOWN SAMPLING	ON
DOLBY DIGITAL	ON
DTS	PCM
ANALOG	2.0 CH

FRONT(L/R), CENTER, SURROUND(L/R) (Default: LARGE)

LARGE: Select this when the connected speaker is capable of playing back sounds of 100Hz or less.

SMALL: Select this when the connected speaker is not capable of playing back sounds of 100Hz or less.

OFF: Select this when it is not connected. (It cannot be set OFF on the FRONT speaker.)

SUB WOOFER (Default: ON)

ON: Select this when SUB WOOFER is connected.

OFF: Select this when it is not connected.

NOTES:

• “OFF” is not available for SUB WOOFER when

“SMALL” is selected for FRONT(L/R).

• “SMALL” is not available for FRONT(L/R) when “OFF”

is selected for SUB WOOFER.

• When in playback of DVD audio, the sound may not

come out as set due to restrictions in the disc or the

player.

• During DVD-Audio playback, the Low Pass Filter

(which filters out the sound with the sound wave fre-

quency over 100Hz) of the SUB WOOFER will be

turned off with the following speaker setting. Otherwise,

When playing disc with copyright protection

•The sound will be down sampled at 48 kHz, even if you set to OFF.

DOLBY DIGITAL (Default : ON)

QUICK

Set to ON when the player is con-		AUDIO
		DRC	ON
nected to Dolby Digital decoder.		DOLBY DIGITAL	ON
		DOWN SAMPLING	ON
ON:	Output by Dolby Digital.	DTS	PCM
		ANALOG	2.0 CH

OFF: Convert the Dolby Digital to PCM.

DTS (Default : PCM) QUICK

DTS:	Output by DTS sound	AUDIO
	Set to DTS when the unit is	DRC	ON
	connected to DTS decoder.	DOLBY DIGITAL	ON
PCM:	Convert the DTS sound	DOWN SAMPLING ON
		ANALOG	2.0 CH
		DTS	PCM

to PCM.

ANALOG (Default : 2.0 CH)

the Low Pass Filter will be turned on.

FRONT(L/R): LARGE

CENTER: LARGE

SUB WOOFER: ON

SURROUND(L/R): LARGE

DELAY TIME

To enjoy 5.1-channel surround sound, the distance between the listening position and all speakers (excluding the Sub woofers) should ideally be set at a uniform distance on a cir- cle. If the speakers cannot be set at this manner, the ideal lis- tening position can be virtually created

with the delay time setting.

Use the Cursor buttons (K or L) to	AUDIO
	DISTANCE	FEET
select the setting item, then press the	DELAY TIME
	FRONT(L/R)	10ft
ENTER button.	SURROUND	10ft
• Press the Cursor buttons (K or	CENTER	10ft
	DEFAULT	ON
L) to select the speaker to set,

then press the ENTER button.

2.0CH: Output 2ch sound

5.1CH: Output Multi channel sound

AUDIO		AUDIO
		ANALOG
DRC	ON	2.0 CH

DISTANCE (Default : FEET)

METERS(when the ENTER button is pressed): The unit of distance is set to meters (“m”).

FEET(when the ENTER button is pressed): The unit of distance is

set to feet (“ft”).

DOWN SAMPLING	ON	5.1 CH
DOLBY DIGITAL	ON
DTS	PCM
ANALOG	2.0 CH

5Press the SETUP button to exit.

Speaker Setting

When 5.1CH is selected for analog out, some speaker settings will be required.

1 Press the Cursor buttons (K
or L) to select 5.1CH, then	AUDIO

FRONT(L/R), CENTER, SUR- ROUND(L/R)

(Default : 10ft)

FRONT(L/R):

The distance can be set within the range of 0 to 60 feet.

CENTER, SURROUND:

These are depends on the setting value of FRONT(L/R).

AUDIO

DELAY TIME

DISTANCE	FEET
FRONT(L/R)	10ft
CENTER	10ft
SURROUND	10ft
DEFAULT	ON

AUDIO

FRONT(L/R)

11ft

10ft

9ft

8ft

7ft

6ft

5ft

	press the ENTER button.	5.1 CH
	Press the Cursor buttons (K	SPEAKER SIZE
		DELAY TIME
2
		BALANCE
	or L) to select the below

items, then press the ENTER button.

NOTES:

•It is not possible to adjust this item if CENTER and SURROUND have been set to OFF in the SPEAKER SIZE setting.

•When DEFAULT is selected and the ENTER button is pressed, all the items are restored to their factory default settings.

– 27 – EN