Marantz DV7001 manual Controls & Displays, English

Controls & Displays

Note

•HDMI ON is set when the unit is shipped from the factory.

•Set HDMI under the DVD Setup Menu to use HDMI functions (see pages 41, 42, 47).

•This remote control supports two remote control codes: DVD1 and DVD2.

•When the unit is shipped from the factory, the remote control is set to DVD1.

•To set the remote control to DVD2, hold down both 7 (STOP) button and 2 number button on the remote control for at least five seconds. (If the batteries in the remote control are replaced while the remote control is set to DVD2, the setting will revert to DVD1.)

•To set the remote control back to DVD1, hold down both 7 (STOP) button and the 1 number button on the remote control for at least five seconds.

•Also set the REMOT CODE on the FL menu to the same setting as the remote control. (This setting is set to DVD1 when the unit is shipped from the factory.) (see page 34)

3

English

15