Marantz DV7001 manual Digital Out, Lpcm Out, Hdmi Audio Out, DVD Setup Menu, English

DVD Setup Menu

DIGITAL OUT

•Default setting: ALL

Set the Digital output according to your optional audio equipment connection.

•OFF – Turn off the digital output.

•ALL – If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/ receiver.

•PCM ONLY – Only if your receiver is not capable of decoding multi-channel audio.

Note

•If HDMI is activated, DIGITAL OUT is muted. HDMI audio out is related to the “DIGITAL OUT” setting. If set the “ALL” is set, HDMI Audio out is follows the EDID. If set the “PCM” is set, HDMI Audio out is always PCM.

•If you set to “ALL” with a non-DTS compatible amplifier, noise will be output when you play a DTS disc.

•Some DVD-Audio discs prohibit digital audio out due to copy protection.

•No digital audio is output when playing Super Audio CD.

LPCM OUT

•Default setting: 48kHz

If you connect the DVD Player to a PCM compatible receiver via digital terminals, coaxial or optical, you may need to adjust “LPCM Output”. Discs are recorded at

a certain sampling rate. The higher the sampling rate, the better the sound quality.

•48kHz – Playback a disc recorded at the sampling rate of 48 kHz. A 96 kHz (if available on disc) PCM data stream will be converted to 48 kHz.

•96kHz – Playback a disc recorded at the sampling rate of 96 kHz. If the 96 kHz disc is copy-protected, the digital output will automatically be converted to a sampling rate of 48 kHz.

Note

•High sampling rate DVD-Audio discs (192 kHz or 176.4 kHz) always output audio that has been down sampled to 96 kHz or 88.2 kHz through the digital outputs, when LPCM OUT is set to 96 kHz.

HDMI AUDIO OUT

•Default setting: AUTO

•AUTO – In this mode, when discs recorded in Dolby Digital, DTS, or MPEG are played, the respective bit stream signal is output. When DVD-Video/DVD-Audio discs with multi-channel audio are played, the multi-channel signal is output. When discs recorded in 2-channel PCM or other 2-channel format are played, the audio is output as 2-channel PCM. The output formats are limited by the capabilities of the connected component. For example, if the disc is recorded in Dolby Digital but the connected component does not support Dolby Digital, the audio is output as multi-channel PCM. If the connected component does not support multi- channel PCM either, the audio is output as 2-channel PCM.

•Multi PCM – In this mode, when discs recorded in Dolby Digital, DTS, MPEG, or DVD-Video/DVD-Audio are played, a multi-channel signal is output. When discs recorded in 2-channel PCM or other 2-channel format are played, the audio is output as 2-channel PCM. The output formats are limited by the capabilities of the connected component. For example, if the disc is recorded in Dolby Digital but the connected component does not support Dolby Digital, the audio is output as 2-channel PCM.

•2ch PCM – In this mode, audio is output as 2-channel PCM for all discs. Select this mode when the unit is connected to a TV or projector.

•Off – Audio signals are not output from the HDMI jack.

Note

•When audio signals are being output by HDMI- compatible components, digital output signals are muted.

•If HDMI is activated, DIGITAL OUT is muted. HDMI audio out is related to the “DIGITAL OUT” setting. If set to “ALL”, HDMI Audio out is follows the EDID. If set to “PCM”, HDMI Audio out is always PCM.

•Audio is not output when the player is connected to a device with an HDCP-compatible DVI jack.

•Audio signals are not output from DVD-Audio discs with CPPM copyright protection when using components that do not support HDMI standard Ver. 1.1.

•Multi-channel and stereo audio is not output from Super Audio CDs.

6

English

41