Marantz DV8300 manual Connecting Up, Easy Setup, Connecting audio and video cables

Connecting Up

Easy Setup

This easy setup is the minimum set of connec- tions you need to start watching DVD video discs. Both sound and picture are fed directly to your TV using the supplied audio and video cables. For other possible connections, see

pages 11 and 12.

Important

Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.

1 Connect to a composite video input on your TV using the supplied Audio/ Video cable.

Y
CB /PB
									L	L	CENTER
CR /PR
	VIDEO								R	R	SUB W.
COMPONENT	1	2	S1/S2	IN	OUT EXTERNAL INTERNAL	OPTICAL COAXIAL	1	2			SURR.
						DIGITAL		FRONT
	VIDEO OUTPUT			REMOTE CONTROL					AUDIO OUTPUT
						OUTPUT

10

2 Connect to a pair of stereo audio inputs on your TV using the supplied Audio/ Video cable.

Connecting audio and video cables

Be sure to insert each plug fully for the best connection. The plugs

and jacks are colour-

coded to make connection easier.

Connecting system control connections

By connecting this DVD player to another Marantz audio component using a supplied System Control cable, you can remotely operate the components as a single system.

•When connecting to component with a remote sensor (such as the SR-14, SR-18, SR-19), be sure to connect the REMOTE CONTROL IN jack of this DVD player to the REMOTE CONTROL OUT jack of the component with the remote sensor.

•When connecting to component which is not equipped with a remote sensor, be sure to connect the component to the REMOTE CONTROL OUT jack of this DVD player.

3 Plug into a standard AC wall outlet.

Synchronized power on and off

•Connect with the remote control output jack of a component (such as the SR-14, SR-18, SR-19) which is compatible with Marantz remote control system. The remote control allows to switch the power of this DVD player to “POWER ON and Standby mode”.

Note

Be sure to leave power switch on the Front panel in the power mode.

Remote switch

•When using this DVD player independently, set this switch to INTERNAL. When using this DVD player in a system with a Marantz tuner or timer equipped with a remote sensor, set the switch to EXTERNAL.