Getting Started

Using the FL menu

The FL menu has been designed to set “DISP MODE”, “AUTO P OFF” and

“REMOT CODE”.

The FL menu can not be used if a disc is playing.

It is recommended to set the FL menu before loading a DVD.

If a DVD has been loaded, be sure to press STOP 7 twice before proceeding.

(If “RESUME” is displayed in the FL display, press STOP 7.)

Selecting the FL menu

Press SETUP for longer than 1 sec.

The FL OFF indicator on the player turn on and off.

FL menu is displayed in the FL display.

 

FL OFF

 

 

 

SACD/DVD PLAYER DV8300

 

 

PAUSE

STOP

PLAY

POWER

DISP MODE

FL OFF

OPEN/CLOSE

 

 

FL menu

Move the cursor control joystick down to select the FL menu you want as follows.

(Example)

DISP MODE

AUTO P OFF

REMOT CODE

To exit the FL menu

When you have compleated setting up the FL menu or if you want exit the FL menu. Press SETUP to close the FL menu.

DISP MODE setting

Select DISP MODE, then press ENTER.

Move the cursor control joystick down to select the type of DISP MODE you want to set as follows.

16

(Example)

DISP OFF *

DISP ON

* Factory setting

Press ENTER you want to set.

The menu select is set.

If you replay a CD or SACD while DISP ON is selected, FL display and video output shut off automatically. FL display and video output are on during Stop and Pause. And if you push the Dimmer Button on the remote control during DISP ON, for three seconds, only FL display is displayed.

AUTO P OFF setting

Select AUTO P OFF, then press ENTER.

Move the cursor control joystick down to select the type of AUTO P OFF you want to set as follows.

(Example)

ON 30 MIN *

OFF

* Factory setting

Press ENTER you want to set.

The menu select is set.

The standby mode is automatically selected to save power if the player is left in the stop mode for about 30 minutes.

REMOT CODE setting

Select REMOT CODE, then press ENTER. Move the cursor control joystick down to select the type of REMOT CODE you want to set as follows.

(Example)

DVD 1 *

DVD 2

* Factory setting

Press ENTER you want to set.

The menu select is set.

The DVD player support two remote control codes: DVD 1 and DVD 2.

Set the remote control code of the Remote Control to the same setting.

See page 14 for more information.

Page 16
Image 16
Marantz DV8300 manual Getting Started, Using the FL menu