Creating a video wall
With
• Connect signal cables and remote cables as shown below.
Video signal |
| RGB/DVD/HD signal |
|
|
|
BNC connector
|
|
|
| ( | VIDEO | BNC connector | OUT |
|
|
|
|
|
| VIDEO1 I N / OUT) |
|
|
| ||
|
|
|
|
| VIDEO Signal | RGB signal/ | IN | ||
|
| VIDEO 3 |
|
| VIDEO 2 |
| |||
| RCA phono plug |
|
|
|
|
| |||
IN |
|
|
|
| DVD/HD signal |
| |||
VIDEO Signal |
| ( |
| 1AUDIO R |
|
|
|
| |
|
| ) | L |
|
|
|
| ||
|
| MONO |
|
|
|
|
|
|
|
|
|
|
| Y |
|
|
|
|
|
|
|
|
|
| DVD1 |
|
|
|
|
Remote | IN | I N |
|
|
control | REMOTE | OUT | OUT | control |
|
| Remote | ||
|
|
|
|
Remote IN control
Cr/Pr | R/ |
|
G/ Y | RGB | |
Cb/Pb | B/ | 2 / DVD2 |
HD |
| / HD2 |
VD |
|
|
( IN / OUT |
| RGB 1 |
) |
|
|
I N |
|
|
REMOTE |
|
|
OUT |
|
|
OUT
OUT
RGB signal/ DVD/HD signal
Remote control
Note:
1. The VIDEO1 and RGB1 terminals can be used for either INPUT or OUTPUT.
When LOOP OUT is ON, do not connect an OUTPUT signal from another unit, that will place an extraordinary load on the other unit and may damage it.
2.LOOP OUT can not be turned ON while signals are input to RGB1 terminal.
3.LOOP OUT can be turned ON while signals are input to RGB1 terminal if the POWER is switched ON.
Information
•To loop signals out to another plasma display, set the LOOP OUT to ON.
•To create a video wall, set the VIDEO WALL menu items properly.
•To connect monitors, please use a 1~2m (3.3~6.6 feet) BNC cable (any commercially available cable).
•If the image quality is poor, do not use the monitor’s out terminal. Use a distribution amplifier (any commercially available distribution amplifier) to connect the split signals to the respective monitor INPUT terminals.
•Being used as a video wall function, maximaly
•A distribution amplifier is particularly recommended when using a
•From the second monitor onward, connections require a
Cable Management
Using the cable clamps provided with the plasma display, bundle at the back of the unit the signal and audio cables connected to the display.
* The cable clamp will differ according to the model.
Back of the unit |
mounting hooks/mounting holes |
To attach
1. | 2. |
| clamp |
mounting hook | cables |
To attach |
|
1. | 2. |
| clamp |
To detach
To detach
mounting hole
cables
10
