Marantz PD5010D manual Reducing noise in the picture, Example Setting NR-3,  Nr

Reducing noise in the picture

Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor.

Example: Setting “NR-3”

Press the PROCEED button on the remote control unit to

display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “PICTURE”, then press the PROCEED button.

The “PICTURE” screen appears.

2.Use the ▲ and ▼ buttons to select “NR”.

P I C T U R E

CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT		R				G
PICTURE MODE
		:	MEMORY
COLOR TEMP.		:	2
NR		: OFF
SEL.	ADJ.				RETURN
				EXIT

3.Use the
and  buttons to select “NR-3”. The mode switches as follows when the
and  buttons are pressed:

→ OFF ↔ NR-1 ↔ NR-2 ↔ NR-3 ←

4.Once the setting is completed ...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

NR

*“NR” stands for Noise Reduction.

*This function reduces noise in the picture.

Types of noise reduction

There are three types of noise reduction. Each has a different level of noise reduction.

The effect becomes stronger as the number increases (in the order NR-1→ NR-2→ NR-3).

OFF Turns the noise reduction function off.

NR : NR-3

*If neither the
or  button is pressed within 5 seconds, the current selection is set and the previous screen reappears.

23