Marantz PD6140D Option1 Settings Menu, Setting the on-screen menu,  When “AUTO PICTURE” is “OFF”

Information

When “AUTO PICTURE” is “OFF”

IMAGE ADJUST

ASPECT MODE		:	FULL
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE		:	OFF
FINE PICTURE
PICTURE ADJ.
SEL.	ADJ.			RETURN
			EXIT

When Auto Picture is off, the Fine Picture and the Picture ADJ. items are displayed so that you can adjust them.

Adjusting the Auto Picture

ON	The Picture ADJ., Fine Picture and
	Position adjustments are made
	automatically.
	Not available for digital ZOOM.
OFF	The Picture ADJ., Fine Picture and
	Position adjustments are made
	manually.

*If FINE PICTURE won’t be adjusted, set Auto Picture to OFF and adjust manually.

Adjusting the position of the image

V-POSITION ...Adjusts the vertical position of the image.

H-POSITION ... Adjusts the horizontal position of the image.

V-HEIGHT .......Adjusts the vertical size of the image.

(Except for STADIUM mode) H-WIDTH ......... Adjusts the horizontal size of the

image. (Except for STADIUM mode)

FINE PICTURE* .. Adjusts for flickering.

PICTURE ADJ.* ... Adjusts for striped patterns on the image.

*The Picture ADJ. and Fine Picture features are available only when the “Auto Picture” is off.

*The AUTO PICTURE, FINE PICTURE and PICTURE ADJ. are available only for RGB signals.

But, these features are not available for moving pictures on VIDEO, HD/DVD or RGB.

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults except for Auto Picture.

Option1 Settings Menu

Setting the on-screen menu

This sets the position of the menu, the display format (horizontal or vertical) etc.

Example: Turning the DISPLAY OSM off

1.On the MAIN MENU, select “OPTION1”, then press the MENU/ENTER button.

The “OPTION1” menu appears.

2.Use the ▲ and ▼ buttons to select “OSM”, then press the MENU/ENTER button.

The “OSM” menu appears.

3.Use the ▲ and ▼ buttons to select “DISPLAY OSM”.

4.To set the DISPLAY OSM to “OFF”...

Use the
and  buttons to select “OFF”.

The mode switches as follows each time the
or  button is pressed:

ON ↔ OFF

			OSM
	DISPLAY OSM		:	OFF
OSM ADJ.			:	1
OSM ANGLE			:	H
OSM ORBITER			:	OFF
		SEL.	ADJ.		RETURN
				EXIT

Information

DISPLAY OSM settings

ON	The on-screen menu appears.
OFF	The on-screen menu does not appear.

If you press the DISPLAY button on the remote control for more than 3 seconds the main menu will appear and can be set (although it is not ON).

OSM ADJUST settings

Adjusts the position of the menu when it appears on the screen.

The position can be set between 1 to 6.

OSM ANGLE settings

Sets the display format (landscape “H” or portrait “V”). When the unit is installed vertically set the OSM ANGLE at “V”.

“H”

	OPTION1			1 / 3
OSM
BNC INPUT			:	RGB
D-SUB INPUT			:	RGB
RGB SELECT			:	AUTO
HD SELECT			:	1080B
INPUT SKIP			:	OFF
ALL RESET			:	OFF
NEXT PAGE
SEL.	MENU/ENTER	OK		EXIT	RETURN

23