Marantz PD6140D Reducing noise in the picture, Setting the color temperature,  Nr, Information

Reducing noise in the picture

Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor.

Example: Setting “NR-3”

1.On the MAIN MENU, select “PICTURE”, then press the MENU/ENTER button.

The “PICTURE” screen appears.

2.Use the ▲ and ▼ buttons to select “NR”.

			PICTURE		1 / 2
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE				:	NORMAL
	NR	NEXT PAGE		:	OFF
	SEL.		ADJ.		EXIT	RETURN

3.Use the
and  buttons to select “NR-3”.

The mode switches as follows each time the
or  button is pressed:

→ OFF ↔ NR-1 ↔ NR-2 ↔ NR-3 ←

NR : NR-3

*If neither the
or  button is pressed within 5 seconds, the current selection is set and the previous screen reappears.

Information

NR

*“NR” stands for Noise Reduction.

*This function reduces noise in the picture.

Types of noise reduction

There are three types of noise reduction. Each has a different level of noise reduction.

The effect becomes stronger as the number increases (in the order NR-1→ NR-2→ NR-3).

OFF Turns the noise reduction function off.

Setting the color temperature

Use this procedure to set color tone produced by the plasma display.

Example: Setting “HIGH”

1.On the MAIN MENU, select “PICTURE”, then press the MENU/ENTER button.

The “PICTURE” screen appears.

2.Use the ▲ and ▼ buttons to select “COLOR TEMP.”.

3.Use the
and  buttons to select “HIGH”.

The mode switches as follows each time the
or  button is pressed:

→ LOW ↔ MID LOW ↔ MID ↔ HIGH ←

* See below to set “WHITE BALANCE”.

			PICTURE		2 / 2
		PREVIOUS PAGE
	COLOR TEMP.			:	HIGH
GAMMA				:	2
LOW TONE				:	AUTO
COLOR TUNE
		SEL.	ADJ.			RETURN
					EXIT

*If neither the
or  button is pressed within 5 seconds, the current selection is set and the previous screen reappears.

Information

Setting the color temperature

LOW	Redder
MID LOW	Slightly redder
MID	Standard (slightly bluer)
HIGH	Bluer

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

Adjusting the color to the desired level

Use this procedure to adjust the white balance for each color temperature to achieve the desired color quality.

Example: Adjusting the “GAIN RED” of “HIGH” color temperature

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

Perform Steps 1-3 of COLOR TEMP., then...

4.Press the MENU/ENTER button.

The “WHITE BALANCE” screen appears.

5.Use the ▲ and ▼ buttons to select “GAIN RED”.

WHITE BALANCE

COLOR TEMP. HIGH

GAIN RED
GAIN GREEN
GAIN BLUE
BIAS RED
BIAS GREEN
BIAS BLUE
RESET		: OFF
SEL.	ADJ.	EXIT RETURN

19