ENGLISH

NAMES AND FUNCTIONS OF PARTS

FRONT PANEL

 

INTEGRARED AMPLIFIER PM-11S1

DISPLAY

ATT.

TONE

PRE OUT

 

OPERATE

SPEAKER

 

A

REC OUT

INPUT

VOLUME

SELECTOR

 

 

POWER ON/OFF

SPEAKER

PHONES

PHONO

B

MC

qPOWER ON/OFF Switch

This switch turns power to the PM-11S1 ON and OFF. When pressed, power is activated and the blue indicator on the display w lights up. Approximately 8 seconds after power is activated, audio output is enabled. Pressing the switch again turns power OFF.

wDisplay

The display displays the selected input source, volume level and setting status.

eINPUT SELECTOR Knob

This knob is for selecting the input source to use in play- back and recording. The selected input source is displayed on the display w.

Turns the side illumination !4on both sides of the display ON and OFF. This operation sets the always-ON mode of the side illumination, therefore once the side illumination is turned OFF, it stays OFF and does not light even if power is shut OFF and reactivated. To turn the side illumination ON again, press and hold the DISPLAY button for 3 sec- onds or longer.

If pressed and held for less than 3 seconds:

Turns the display ON and OFF. When the always-ON mode is engaged for the side illumination, the side illumination turns ON and OFF in synch with the display.

If the display is out and the VOLUME knob or other control is operated, the display lights up. It will automatically go out 3 seconds after the operation has been completed.

For instructions on how to operate the side illumination, see “HOW TO OPERATE THE SIDE ILLUMINATION” on pg. 18.

rVOLUME Knob

This knob is for setting the volume. The volume level is displayed on the display w. Turning the knob clockwise increases the volume, while turning it counterclockwise de- creases the volume. When turned slowly, the volume can be fine-adjusted in 0.5 dB steps, whereas when turned rapidly, volume level changes greatly.

iTONE Button

This button turns the bass and treble tone control ON and OFF. When tone control is ON, the center of the button is lit a blue color. For instructions on how to adjust bass and treble, see “How to Trim Bass” and “How to Trim Treble” on pg. 20.

tInfrared Receptor Window

This is the receptor of control signals sent from the included RC-11PMS1 remote controller. Point the remote controller towards this window to properly send signals.

yPHONES Jack

This jack is for connecting headphones with a standard stereo plug. To listen with headphones, turn speaker out- put OFF by setting the SPEAKER A and B buttons in the OFF position.

uDISPLAY Button

This button turns the display and side illumination ON and OFF. The button performs two functions depending on how long it is pressed.

If pressed and held for 3 seconds or longer:

oSPEAKER A/B Buttons

These buttons turn the speaker output to the speakers connected to the SPEAKER SYSTEM A/B terminals on the rear panel ON and OFF. When speaker output is ON, the center of the button is lit a blue color. To listen with headphones, turn speaker output OFF.

!0ATT Button

This button attenuates volume with one press of the but- ton. When pressed, “ATT” flashes on the display and the volume is reduced. If pressed again, the mode is canceled and the original volume level is restored. Attenuation level is set to –20 dB when the PM-11S1 is shipped from the factory, but it can be set to either –40 dB or -∞(mute). For instructions on how to set attenuation level, see “How to Set Attenuation Level” on pg. 18.

10

Page 13 Page 15
Page 14
Image 14
Marantz PM-11S1 manual Names and Functions of Parts, Front Panel
Page 13 Page 15

PM-11S1 specifications

The Marantz PM-11S1 is a high-performance integrated amplifier that embodies the brand's commitment to delivering exceptional audio quality and craftsmanship. Launched as part of Marantz’s premium series, the PM-11S1 is designed to meet the demands of audiophiles and music enthusiasts alike.

At the heart of the PM-11S1 is its robust amplification system, delivering a powerful 100 watts per channel into 8 ohms. This ensures that it can drive a wide range of speakers, providing dynamic and distortion-free sound across various music genres. The amplifier features a fully discrete design, eliminating the use of integrated circuits in critical signal paths, which helps to maintain audio purity and integrity.

One of the standout technologies employed in the PM-11S1 is the Advanced Current Feedback topology. This unique design allows for a wide frequency response and a fast transient response, making it capable of reproducing even the most intricate musical passages with clarity and precision. Furthermore, the amplifier is equipped with a high-quality phono stage, supporting both moving magnet and moving coil cartridges, which allows vinyl enthusiasts to experience their records with exceptional fidelity.

The PM-11S1 also boasts a wide array of connectivity options, including multiple analog inputs, digital inputs for both coaxial and optical signals, and a dedicated balanced XLR input. This versatility makes it compatible with a variety of sources, including CD players, streaming devices, and home theater systems. Additionally, it features a headphone output with a dedicated amplifier, providing a private listening experience without compromising on sound quality.

The build quality of the PM-11S1 is equally impressive, featuring a solid, elegantly designed chassis that minimizes vibrations and internal interference. This not only enhances the overall aesthetics but also contributes to the amplifier's durability and longevity. The front panel includes large, easy-to-use knobs and a clear display, ensuring intuitive operation.

In summary, the Marantz PM-11S1 is a superb integrated amplifier that combines power, versatility, and high-fidelity sound reproduction. With its advanced technologies, robust construction, and thoughtful design, it is a worthy addition to any high-end audio system, providing an unparalleled listening experience that honors the nuances of every musical performance.
Top Page Image Contents