Display

NAMES AND FUNCTIONS OF PARTS

!1PRE OUT Button

This button turns output from the PRE OUT jack on the rear panel ON and OFF. When output is ON, the center of the button is lit a blue color.

!2REC OUT Button

This button turns the signals output from the RECORDER 1 and 2 OUT jacks on the rear panel ON and OFF. When output is ON, the center of the button is lit a blue color. For instructions on how to record, see “RECORDING” on pg. 16.

When RECORDER 1 is selected as the input source, sig- nals are not output to the RECORDER 1 OUT jack. The same goes for the RECORDER 2 OUT jack when RE- CORDER 2 is selected as the input source.

!3PHONO MC Button

This button switches the phono equalizer between MC and

MM.When MC is set, the center of the button is lit a blue color. Set the phono equalizer amplifier according to the type of cartridge you use.

!4Side Illumination

The side illumination casts a blue light over switches and buttons. It can be turned ON and OFF from the DISPLAY button. For instructions on how to operate the side illumi- nation, see “HOW TO OPERATE THE SIDE ILLUMINA- TION” on pg. 18.

OPERATE

!5Power Indicator

This indicator is lit a blue color while power to the PM- 11S1 is ON.

!6Display Panel

Approximately 3 seconds after power to the PM-11S1 is activated, the ID set for the PM-11S1 is displayed here.

After that, the top line displays the in-

put source selected with either the IN- PUT SELECTOR knob or the remote controller, while the bottom line dis- plays the volume level set with the

VOLUME knob or the remote control-

ler. When the PM-11S1 I is first activated, the attenuation level (dB) is displayed for the initial volume level.

Volume Level Indication

Max

Turn the VOLUME knob on the PM-11S1 to the right or press the VOLUME 3 button on the remote controller.

0.5 dB steps

Turn the VOLUME knob on the PM-11S1 to the left or press the VOLUME 4 button on the remote controller.

Min

The display panel also displays left-right level balance and tone control trimming level. For instructions on how to ad- just bass and treble, see “How to Trim Bass” and “How to Trim Treble” on pg. 20.

The display panel also displays messages in response to PM-11S1 operation.

!7OPERATE Indicator

This indicator indicates the operating status of the PM- 11S1. When the ID is set to “0” for standalone operation, it is lit a red color. When multiple PM-11S1s are connected by FCBS, only the OPERATE indicator of the master PM- 11S1 (ID 1) lights a red color. Slave PM-11S1s whose OPERATE indicator does not light a red color cannot be used to operate other units in sync. For more information on the FCBS, see “ABOUT FCBS” on pg. 17.

Also, the OPERATE indicator flashes if a protective circuit trips. For troubleshooting procedures, see “TROUBLE- SHOOTING” on pg. 22.

ENGLISH

PM-11S1 specifications

The Marantz PM-11S1 is a high-performance integrated amplifier that embodies the brand's commitment to delivering exceptional audio quality and craftsmanship. Launched as part of Marantz’s premium series, the PM-11S1 is designed to meet the demands of audiophiles and music enthusiasts alike.

At the heart of the PM-11S1 is its robust amplification system, delivering a powerful 100 watts per channel into 8 ohms. This ensures that it can drive a wide range of speakers, providing dynamic and distortion-free sound across various music genres. The amplifier features a fully discrete design, eliminating the use of integrated circuits in critical signal paths, which helps to maintain audio purity and integrity.

One of the standout technologies employed in the PM-11S1 is the Advanced Current Feedback topology. This unique design allows for a wide frequency response and a fast transient response, making it capable of reproducing even the most intricate musical passages with clarity and precision. Furthermore, the amplifier is equipped with a high-quality phono stage, supporting both moving magnet and moving coil cartridges, which allows vinyl enthusiasts to experience their records with exceptional fidelity.

The PM-11S1 also boasts a wide array of connectivity options, including multiple analog inputs, digital inputs for both coaxial and optical signals, and a dedicated balanced XLR input. This versatility makes it compatible with a variety of sources, including CD players, streaming devices, and home theater systems. Additionally, it features a headphone output with a dedicated amplifier, providing a private listening experience without compromising on sound quality.

The build quality of the PM-11S1 is equally impressive, featuring a solid, elegantly designed chassis that minimizes vibrations and internal interference. This not only enhances the overall aesthetics but also contributes to the amplifier's durability and longevity. The front panel includes large, easy-to-use knobs and a clear display, ensuring intuitive operation.

In summary, the Marantz PM-11S1 is a superb integrated amplifier that combines power, versatility, and high-fidelity sound reproduction. With its advanced technologies, robust construction, and thoughtful design, it is a worthy addition to any high-end audio system, providing an unparalleled listening experience that honors the nuances of every musical performance.

Marantz PM-11S1 manual Display

Models: PM-11S1