ENGLISH
NAMES AND FUNCTIONS
REAR PANEL
qwe | r t y | u |
| 3 |
| 3 |
|
| AC IN |
2 | 1 | 2 | 1 |
|
|
|
!2 |
| !1 | !0 | o | i | |
q LINE 1/2 Input Jacks |
|
|
| i AC IN Power Cable Connection Socket | ||
These jacks are for connecting to the output jacks of a | Connect this socket to the power outlet using the included |
tuner, DVD player, etc. | power cord. |
BASIC OPERATIONS BASIC CONNECTIONS NAMES AND FUNCTIONS
wCD Input Jacks
These jacks are for connecting to the output jacks of a Super Audio CD player, etc.
ePHONO GND Terminal
Connect the grounding wire from an analog record player here.
rPHONO Input Jacks
These jacks are for connecting to an analog record player. Both MC and MM cartridges can be used, therefore set the PHONO MC button on the front panel according to the type of cartridge you are using.
tBALANCED Jacks
These jacks are for connecting to the balanced output jacks of a Super Audio CD player, etc.
yPRE OUT Jacks
These jacks are for connecting to the input jacks of another main amplifier or active subwoofer. Output signals can be turned ON/OFF from the PRE OUT button on the front panel.
oF.C.B.S. IN/OUT Jacks
These jacks are used to connect and synchronize up to four amplifiers. For instructions on use and connections, see F.C.B.S. (page. 20).
!0SPEAKER SYSTEMS Output Terminals
You can connect 2 speaker systems to the
!1RECORDER 1/2 Output Jacks
These jacks are for connecting to the recording input jacks of a tape deck etc.
Output signals can be turned ON/OFF from the REC OUT button on the front panel.
!2RECORDER 1/2 Input Jacks
These jacks are for connecting to the output jacks of a tape deck or other type of recording device.
TROUBLESHOOTING ADVANCED OPERATIONS ADVANCED CONNECTIONS
uAMP MODE Switch
STEREO: Set to use this unit as a normal
For more information on
OTHERS
9
