NAMES AND FUNCTIONS

DISPLAY

!5

!6

OPERATE

!7

 

!5Power Indicator

This indicator is lit a blue color while power to the unit is ON.

!6Display Panel

Approximately 3 seconds after the power to the unit is activated, the ID number is displayed here.

After that, the top line displays the selected input source, and the bottom line displays the volume level. The volume attenuation (dB units) is displayed.

ENGLISH

VOLUME Indicator Volume Display

Max

Turn the VOLUME knob on the unit to the right, or press the VOLUME 5 button on the remote controller.

0.5dB Steps

Turn the VOLUME knob on the unit to the left, or press the VOLUME button on the remote controller.

Min

The display also displays the setting values when adjusting the left-right level balance. For instructions on How to Trim Volume Level, see page. 22. Other messages that correspond to various operations are also displayed.

!7OPERATE Indicator

This indicator fl ashes the operating status of the unit. When the ID is set to “0” for standalone operation, it is lit a red color. When multiple amplifiers are connected by F.C.B.S., only ID number “1” for the master is lit red color. The slave amplifi er whose indicator does not light a red color cannot be used to operate other units in sync.

For more information on F.C.B.S., see page. 20. The indicator fl ashes red if a protective circuit trips.

TROUBLESHOOTING ADVANCED OPERATIONS ADVANCED CONNECTIONS BASIC OPERATIONS BASIC CONNECTIONS NAMES AND FUNCTIONS

OTHERS

7

Page 13
Image 13
Marantz PM-11S2 manual 5Power Indicator, 6Display Panel, 7OPERATE Indicator