Specifications
• RMS Power output: | 90 W × 2 (8 Ω/ohms) |
(20 Hz – 20 kHz | 140 W × 2 (4 Ω/ohms) |
driven) |
|
• Total harmonic distortion: | 0.05 % |
(20 Hz – 20 kHz |
|
driven, 8 Ω/ohms) |
|
• Output band width: (8 Ω/ohms, 0.05 %) | 5 Hz − 40 kHz |
• Frequency response: (CD, 1 W, 8 Ω/ohms | 5 Hz − 100 kHz ± 3 dB |
load) |
|
• Damping factor: (8 Ω/ohms, 20 Hz − 20 kHz) | 100 |
• Input sensitivity/Input impedance |
|
PHONO (MC): | 270 µV / 100 Ω/ohms |
PHONO (MM): | 2.7 mV / 47 kΩ/kohms |
CD/LINE: | 240 mV / 20 kΩ/kohms |
P. DIRECT IN: | 1.7 V / 20 kΩ/kohms |
• Output voltage/Output impedance |
|
PRE OUT: | 1.7 V / 220 Ω/ohms |
•Maximum allowable PHONO input level
(1 kHz) |
|
MC: | 15 mV |
MM: | 150 mV |
• RIAA deviation: (20 Hz−20 kHz) | ± 0.5 dB |
• S/N |
|
PHONO (MC): | 75 dB (0.5 mV Input, 1 W Output) |
PHONO (MM): | 86 dB (5 mV Input, 1 W Output) |
CD/LINE: | 106 dB (2 V Input, Rated output) |
• Tone control |
|
BASS (50 Hz): | ± 10 dB |
TREBLE (20 kHz): | ± 10 dB |
• Power requirement: | AC 120 V, 60 Hz |
• Power consumption (UL60065): | 220 W |
• Standby power consumption: | 0.2 W |
For the purpose of improvement, the specifications and design are subject to change without notice.
Index
vvA
Accessories·························································· 1 Adjusting the tone·············································· 17 Adjusting the volume·········································· 16 Auto Standby mode············································ 19
vvC
Cables used for connections································ 7 Connection
5.1
vvF
Front panel···························································· 4
ENGLISH
vvM
MM/MC cartridge select····································· 24
vvP
Protection circuit················································· 24
vvR
Rear panel····························································· 5 Remote control unit·············································· 6 Inserting the batteries········································ 2
vvS
Selecting the input source·································· 16 Speaker impedance············································ 24
vvT
Tips····································································· 20 Troubleshooting·················································· 20 Turning off the sound temporarily······················· 17 Turning the power on········································· 16
Preparation
Connections
Playback
Settings
Tips
Appendix
25
