Marantz PM7001KI manual Rear Panel, Names And Functions Of Parts

NAMES AND FUNCTIONS OF PARTS

!3Infrared Receptor Window

This is the receptor of control signals sent from the RC4001PM remote controller. Point the remote controller towards this window to properly transmit signals.

!4PHONES jack

This jack is for connecting headphones with a standard stereo plug. To listen with headphones, turn the speaker output OFF by setting the SPEAKERS 1 and 2 buttons o in the OFF position.

ENGLISH

REAR PANEL

A	B C D				E		F
PHONO		PRE OUT	MAIN IN	R	SPEAKERS	L
					SYSTEM 1
L	GND	L	L			MODEL NO. PM7001
R		R	R				AC IN
					SYSTEM 2
							REMOTE
						SERIAL NO.	CONTROL
CD	TUNER AUX	RECORDER 1	RECORDER 2
	/ DVD	IN OUT	IN OUT				IN
L			L	SYSTEM 1 OR SYSTEM 2 4 -16 OHMS
				SYSTEM 1 AND SYSTEM 2 8		-16 OHMS	OUT
			SEPARATE
R			R
			ON	OFF

MLKJ I H

A PHONO Input jacks

These jacks are for connecting to an analog record player. MM cartridges can be used.

B PHONO GND terminal

Connect the grounding wire from an analog record player.

C PRE OUT jacks

These jacks are for connecting to the input jacks of an- other main-amplifier or active subwoofer.

D MAIN IN jacks

These jacks are for connecting to the output terminals of another pre-amplifier when using the PM7001 as the main- amplifier. In this case, set the SEPARATE switch H to the ON position.

E SPEAKERS SYSTEM 1, 2 output terminals

You can connect 2 speaker systems, SPEAKERS 1 and SPEAKERS 2 E. Speaker output can be turned ON/OFF from the SPEAKERS 1 and 2 buttons o on the front panel.

F AC IN socket

Connect the supplied AC power cable to this socket and a power outlet.

G REMOTE CONTROL jacks

These jacks are for connecting to other Marantz components such as a CD player or DVD player that has a remote control connector (D.BUS jack).

You can use the remote controller supplied with the PM7001 to control the system.

For more details, see page 13.

G

H SEPARATE switch

This switch is used for selecting the pre-amplifier and main- amplifier connection modes.

OFF: Select this position when the amplifier is used as a normal integrated amplifier. (Standard factory set- ting)

ON: The pre-amplifier and main-amplifier are separated. The PM7001 can be used as a main-amplifier when input is connected to the MAIN IN jacks D.

I RECORDER 1/RECORDER 2 output jacks

These jacks are for connecting to the recording input jacks of a CD-R recorder, MD deck, tape deck, etc. Output sig- nals can be selected using the REC SELECTOR knob !2 on the front panel.

J RECORDER 1/RECORDER 2 input jacks

These jacks are for connecting to the output jacks of a CD- R player, MD deck, tape deck, etc.

K AUX/DVD input jacks

These jacks are for connecting to the output jacks of a DVD player or other LINE component.

L TUNER input jacks

These jacks are for connecting to the output jacks of a tuner or other LINE component.

M CD input jacks

These jacks are for connecting to the output jacks of a CD player or similar component.

7