ENGLISH
Using the Pitch Controls
PMD331/PMD340 Only
The disc playback speed can be adjusted by a maximum of +/– 12% in 0.1% increments.
Tip:
When playing two CD players simultaneously, it is possible to use the pitch bend function on one player to easily adjust the playback speed so that both CD players are in unison.
Increasing the Disc Playback Speed
Procedure
1.Press the button !7to begin playing a CD.
2.Press the PITCH ON/OFF button @6to turn on the pitch control function.
3.Turn PITCH/SEARCH DIAL @0clockwise.
-Turn the dial approximately 10 degrees to increase the playback speed by 0.1%.
-PITCH/SEARCH DIAL @0shows up to +12%.
4.While the PITCH BEND + @7button is pressed, the playback speed increases temporarily by up to 8%.
Tip:
The disc playback speed changes rapidly when the PITCH BEND + @7button is pressed. As soon as you release the button, the playback speed immediately returns to the speed that was in effect before the button was pressed.
Note:
If “D.OUT” has been set to “On” in the presets, the pitch bend function will not work.
Decreasing the Disc Playback Speed
Procedure
1.Press the button !7to begin playing a CD.
2.Press the PITCH ON/OFF button @6to turn on the pitch control function.
3.Turn PITCH/SEARCH DIAL @0to the counterclockwise.
-Turn the dial approximately 10 degrees to decreases the playback speed by 0.1%.
-The PITCH/SEARCH DIAL @0shows up to
4.While the PITCH BEND – @8button is pressed, the playback speed decreases temporarily by up to 8%.
Tip:
The disc playback speed changes rapidly when the PITCH BEND
Restoring the Normal Playback Speed
Procedure
1.Press the PITCH ON/OFF button @6and the playback speed returns to normal.
Using the A-B Repeat Function
Using the A-B Repeat Function
Procedure
1.Press the button !7to begin playing a CD.
2.While the CD is either playing or paused at the desired position, press the
3.While the CD is either playing or paused at the desired position, press the
Playback starts from point A, and then the segment between points A and B plays repeatedly.
Clearing Points A and B
Pressing the
Tip:
Points A and B are cleared not only if the
back), or if a scan search or direct search is performed.
10