English

DUPLICATION SYNCHRONIZATION

Refer to Fig. 6

CONNECTION

1.Connect the WRC220 * to the RC-5 IN jack of unit #1.

2.Connect the RC-5 OUT jack of unit #1 with the RC-5 IN jack of unit #2.

3.Connect the RC-5 OUT jack of unit #2 with the RC-5 IN jack of unit #3.

4.Up to 100 units can be connected in the same way as de- scribed above.

5.Connect the DECK A OUTPUT jacks of unit #1 with the DECK A INPUT jacks of unit #2.

6.Connect the LOOP THROUGH A OUT jacks of unit #2 with the DECK A INPUT jacks of unit #3.

7.Similarly, connect the LOOP THROUGH OUT and DECK A INPUT jacks of other units up to unit #100.

8.Set the INPUT SELECT switches of units #2 and after to A.

*WRC220 is sold separately.

NORMAL SPEED DUPLICATION

1.Insert the blank cassettes in both Wells A and B of all units.

2.Press the TAPE SPEED NORM buttons of all the units so that the NORMAL indicators of all the units light up.

3.Set the DOLBY NR switches to the desired setting on all the units to record the tapes with noise reduction.

4.Press the A+B button on the WRC220. All the slave units en- ter record-pause mode.

5.Play the source adjust the REC LEVEL controls of the slave units so that the red segments of their level meters light only at peaks in the music.

6.Press the A+B button on the WRC220. All units will start re- cording.

7.To stop duplication, press the A+B button on the WRC220.

Note:

Observe the following notes when dubbing a Dolby NR encoded master tape at normal speed.

1)The difference in signal levels between the duplicated tape and source master tape should be no more than 1 dB ; if the PMD520 is used as the source. The PMD520 has been de- signed so that the difference in level between these tapes is within the standard when the REC LEVEL control is set to the center click position.

2)If the master tape was recorded with Dolby NR and the slaves are to have the same Dolby NR, set Dolby NR off for both the master and the slave.

HIGH SPEED DUPLICATION

1.Insert the master tape in Well A of unit #1.

2.Insert the blank cassettes in both Wells A and B of units #2 and after.

3.Press the TAPE SPEED HIGH buttons of all the units so that the HIGH indicators of all the units light up.

4.DOLBY NR is automatically switched off for high speed du- plication. See Note 1 below.

5.Press the A+B button of the WRC220. All the slave units en- ter record-pause mode.

6.Set the REC LEVEL controls of the slave units to the center click positions. See Note 2 below.

7.Press the TAPE A button of the WRC220. This button should be pressed only once and need not be pressed even when duplication is performed later.

Press the PLAY button of the WRC220. The master tape in Well A of unit #1 starts to be played and both Wells A and B of the units #2 and after start recording.

8.To stop duplication, press the STOP button of the WRC220.

Notes

Observe the following notes when dubbing a Dolby NR encoded master tape at high speed.

1)Dolby NR has a special dynamic characteristic (with respect to the time axis) by responding to the frequency and level and can process signals correctly only in real time. However, as the high speed duplication alters the relationship between the audio signals and time considerably, the Dolby NR is switched automatically off in the high speed duplication mode. If the source was recorded with Dolby NR, the copies will be recorded with the same Dolby NR.

2)The difference in signal levels between the duplicated tape and source master tape should be no more than 1 dB ; if the PMD520 is used as the source. The PMD520 has been de- signed so that the difference in level between these tapes is within the standard when the REC LEVEL control is set to the center click position.

3)Do not connect a tone control or equalizer components for these components may affect the duplication characteristics.

4)During High Speed Operation the factory bias setting is used.

QMS (QUICK MUSIC SEARCH)

The QMS is available only via a remote control when the well is in stop or play mode.

1.From the remote control unit, select the well (Well A or B).

2.Using the numeric keys of the remote control unit, input the number of music programs to be skipped (up to 15).

3.The input number is shown as "P- " on the display.

4.Press the FF or REW button of the remote control unit to start the QMS operation.

5.The unit winds tape at a high speed while detecting blanks between music programs, and enters pause mode when the set number of blank space have been detected.

6.Press the PLAY button to start playback.

14

Page 15
Image 15
Marantz PMD520 manual Duplication Synchronization, QMS Quick Music Search, Connection, Normal Speed Duplication

PMD520 specifications

The Marantz PMD520 is a professional-grade portable cassette deck designed primarily for musicians, audio engineers, and enthusiasts who require reliable recording and playback quality. This versatile device emerged in the late 20th century, catering to the specific needs of those who value high-fidelity audio performance in a compact format.

One of the standout features of the PMD520 is its dual-capstan transport mechanism. This technology ensures precise tape handling, minimizing wow and flutter for an accurate playback experience. The dual-capstan design allows for more consistent tape tension, which translates into better sound quality and reliable performance, crucial for critical listening environments.

The PMD520 also includes a built-in microphone preamp with phono or line-level switchable inputs, facilitating seamless connection to various audio sources. This flexibility makes it an ideal choice for on-location recordings, interviews, and rehearsals, where different types of microphones and instruments might be utilized. Additionally, the device is capable of supporting high-speed dubbing, enabling quick duplication of tapes without compromising audio quality.

Another notable aspect of the PMD520 is its ability to handle different tape types, including standard cassette as well as metal and chrome formulations. This versatility ensures that users can choose the tape that best suits their recording requirements, further optimizing sound fidelity. The cassette deck is engineered for low noise operation, featuring advanced circuitry that minimizes unwanted interference.

The user interface of the PMD520 is straightforward and user-friendly, with clearly labeled buttons and a solid construction that stands up to the rigors of professional use. It features a sturdy, rack-mountable design, which makes it suitable for studio setups, as well as portable applications. The front panel provides easy access to record, play, stop, and fast-forward functionalities.

In addition to its high-quality audio features, the Marantz PMD520 is known for its durability and reliability. Constructed with robust materials, it is designed to withstand the challenges of frequent transportation and use in various environments. Overall, the Marantz PMD520 remains a respected choice for anyone seeking a reliable cassette deck that excels in audio performance and operational efficiency. As the nostalgia for analog recording continues to captivate new generations, the PMD520 stands as a prime example of Marantz's commitment to quality and innovation in sound technology.