Marantz manual If using more than 1 SC-7S2

HOW TO OPERATE FUNCTION AND HOW TO SET UP

ENGLISH

7If using more than 1 SC-7S2

Set up the ID numbers to the respective SC-7S2s to identify each of the SC-7S2s.

qSet up the ID No. switch <1> for the main unit of the SC- 7S2 to control others, which is called <Master> unit. The ID No. set up will be indicated in the display window for 3 seconds when the unit is powered on.

tPlease refer to p.18 for Trim adjustment.

If the whole system consist of more than 3 units, please repeat the same procedure and set up the remaining units. Make sure to change the ID # in the SC-7S2 to match the ID # of the amplifier being adjusted.

yOnce you have completed the trim adjustment, press the EXIT button on the remote control. This concludes the adjustments and memorizes them.

ID NO.

1

2

3

4

5 6

MODE

stereo control amplifier sc - 7s2

A SYNC B

Light Green

RECORDER 2		LINE 2
TRIM	EXIT	TONE
	+
L		R

wSet up the other SC-7S2s <2>–<6> which will be controlled by the Master.

They are called <Slave> units.

The ID No. set up will be indicated in the display window for 3 seconds when the unit is powered on.

stereo control amplifier sc - 7s2

ID NO.

1

2

3

4

5

6 A SYNC B

MODE

Light RED

eThe Trim adjustment set by the Master, will be the same for all Slave SC-7S2s.

rOnce the set up for the Trim has been finished, press the TRIM button on the remote controller.

The trim adjustment will move from Master to Slave. Then the indicator on the Front display of the Slave will illuminate Red, the Sync indicator will flash Red.

RECORDER 2	stereo control amplifier sc - 7s2
TRIM	EXIT
	+
	A SYNC B
L

Light Red Flash Red

19