LOCATION AND FUNCTION OF PARTS AND CONTROLS
Front panel Features | !3TREBLE CONTROL knob | |
q STANDBY indicator | Adjust the high frequency level with this control | |
according to your taste and room acoustics. | ||
This indicator lights up when in the standby mode. | ||
| ||
w F/P (frequency or preset number) button | !4BALANCE CONTROL knob | |
Adjust the sound volume between left and right | ||
This use the display mode to select the frequency | ||
speakers with this control knob. | ||
or preset number display. | ||
|
ENGLISH
eP.SCAN button
This button is used to automatically scan the tuner’s preset stations.
When pressed, the tuner starts scanning the preset stations.
rMEMO (Memory) button
Press this button to memorize the desired station frequency.
tFM MODE button
Press this button to select stereo or monaural mode, when listening to FM broadcasts.
yInput selectors button
These buttons select the audio source. The selected source name will be displayed on Fluorescent display.
uTuning / preset UP and DOWN knob
During AM or FM reception, you can scan to other frequencies or preset number by adjust knob.
iVOLUME CONTROL knob
Adjust the sound volume with this control knob.
oPOWER switch
When this switch is pressed once, the power turns ON and display appear on the display panel. When pressed again, the power turns OFF.
After initialization or resetting, press this switch to enter the standby mode.
To turn the power ON, press any of the function buttons of the main unit or the POWER button of the remote control unit.
!5Display
aSTEREO indicator
This indicator lights up, when in FM stereo mode.
bTUNED indicator
This indicator lights up, when a broadcast is received properly.
cTAPE MONITOR indicator
This indicator lights up, when in TAPE MONITOR Mode.
dPRESET indicator
This indicator lights up, when in preset display Mode.
eMEMORY indicator
When the MEMO (memory) button is pressed, this indicator lights up for about 5 seconds.
fPRESET NUMBER, DISPLAY
Shows the selected preset number.
gFREQUENCY/CHARACTER DISPLAY
This display’s the selected station frequency or the corresponding words when selecting a program source.
!0PHONES socket for stereo headphones
This jack is compatible with a wide range of conventional dynamic headphone types.
!1SPEAKERS (system 1 or 2) buttons
Use these buttons to select speaker system 1 or 2, or both.
!2BASS CONTROL knob
Adjust the low frequency level with this control according to your taste and room acoustics.
7