FRONT PANEL FEATURES (SEE PAGE iii.)
qPOWER switch and STANDBY indicator
When this switch is pressed once, the unit turns ON and display appears on the display panel. When pressed again, the unit turns OFF and the STANDBY indicator lights.
When this unit is in the standby mode, pressing one of the FUNCTION SELECTOR buttons also allows to turn the power on.
“When the STANDBY indicator lights up, the apparatus is NOT disconnected from the AC supply mains.”
wPHONES jack for stereo headphones
Conventional dynamic headphones can be plugged in here.
Notes:
When using headphones, the surround mode is switched automati- cally to STEREO and the sound from the speakers is muted.
The surround mode returns to the previous setting as soon as the plug is removed from the jack.
eSURROUND MODE Selector knob
When this knob is turned, the surround mode is switched in the following sequence.
AUTO 
DTS 
STEREO
VIRTUAL 
5 STEREO 
GAME 
MATRIX 
HALL
Note:
Not all modes will be present if an analog input is selected.
rVOLUME control knob
Adjusts the overall sound level. Turning the control clockwise increases the sound level.
tFUNCTION SELECTOR buttons (AUDIO/
VIDEO)
These buttons are used to select the sources.
The video function selector, such as TV , DVD , VCR1 and DSS/ VCR2, selects video and audio simultaneously.
Audio function sources such as CD, TAPE , CDR/MD and TUNER may be selected in conjunction with a Video source.
This feature (Sound Injection) combines a sound from one source with a picture from another.
Choose the video source first, and then choose a different audio source to activate this function.
yA/D (Analog/Digital) SELECTOR button
This is used to select between the analog and/or digital inputs. When analog input is selected, “ANALOG” will be shown in the display.
Note:
This button is not used for an input source that is not connected to a digital input.
uS. ( Source) DIRECT button
When this button is pressed, the tone control circuit is bypassed as well as Bass Management.
Notes:
The surround mode is automatically switched to AUTO when the source direct function is turned on.
Additionally, Speaker Configurations are fixed automatically as follow. Front speaker = Large
Center speaker = Large
Surround speaker = Large
Sub woofer = Yes
iSLEEP button
Set the sleep timer function with this button .
oDIMMER (Display off) button
When this button is pressed once, the display is dimmed.
When this button is pressed twice, the display is turned off and the “DISPLAY OFF” indicator lights up.
Press this button again to turn the display ON again.
!0MUTE button
Press this button to mute the output to the speakers. Press it again to return to the previous volume level.
!1CLEAR button
Press this button to cancel the station memory setting mode or preset scan tuning.
!2MEMORY button
Press this button to enter the tuner preset memory numbers and station names.
!3TUNING / PRESET UP and DOWN buttons
During reception of AM or FM, you can scan the other frequencies or select another preset station pressing these buttons.
!4FREQUENCY / PRESET button
During reception of AM or FM, you can change the function of the UP/ DOWN buttons for scanning frequencies or selecting preset stations by pressing this button.
!5MODE button
Press this button to select the auto stereo mode or mono mode when the FM band is selected. The M indicator lights in the auto stereo mode.
!6INFRARED SENSOR window
This window receives infrared signals from the remote control unit.
ENGLISH
3
