Preparing the Remote Controller
ENGLISH | 1. Open the cover. |
|
2.Insert batteries (AA).
Make sure to match the + and – marks on the batteries with inside the battery component.
3.Close the cover.
INTRODUCTION
CAUTION
–Do not mix old and new batteries, and never mix different types of batteries (standard, alkaline and so on).
–If the user does not intend to use the Remote Controller for a long time, remove the batteries.
–Do not be subjected to strong shock.
–Do not be subjected to moisture.
If moisture gets the unit, wipe it off immediately.
–Keep away from heat.
–The effect range of the Remote Controller is approximately 6m.
–The Remote Controller operation may not function if the projector’s IR sensors are exposed to direct sun light or strong artificial light, or if there is an obstacle between the IR sensors and the Remote Controller.
WARNING
–The available types of batteries are limited: manganese dry cell, and alkaline.
7
