Making frozen
drinks
And now for the fun part! You are just a few short steps away from enjoying your perfectly blended,
preparing the unit for use
1. Place the unit on a clean, dry, flat surface.
2. If Ice Reservoir is not yet installed, place the Ice Reservoir on the unit front first, then push down firmly on the back to click it into place. (Figure 1)
NOTE: IF THE ICE RESERVOIR IS NOT SEATED FIRMLY IN PLACE, THE SHAVER UNIT WILL NOT OPERATE.
3. Remove the Power Cord Storage Door at the back of the unit by pushing down on the release tab. Remove the Power Cord and plug into a standard
Adding Ice to the Ice Reservoir
4. Remove the Ice Reservoir Lid by rotating it
5. Fill the Ice Reservoir with ice cubes to the “Ice Level” Line (Figure 4).
NOTE: FOR BEST RESULTS, USE ICE THAT HAS BEEN OUT OF THE FREEZER FOR 10 TO 15 MINUTES.
6. Replace the Ice Reservoir Lid by rotating it clockwise back into place. (Figure 5)
Figure 1
Figure 2
Figure 3
Figure 5 | Figure 4 |