Margaritaville DM3000 Be Sure To Rinse The Shaving Blade And Dry Thoroughly Before Storing

To remove the Ice Melt Reservoir hold the unit still and pull straight out on the handle (Figure 9).

6. Turn the Shaving Blade Assembly Nut counter clockwise (to the left), remove the Shaving Blade Assembly, rinse and dry prior to storage in a safe place (Figure 7).

BE SURE TO RINSE THE SHAVING BLADE AND DRY THOROUGHLY BEFORE STORING.

7. Carefully lift the Blending Jar(s) straight up to remove. At the center Blending Station, the Ice Chute is spring-loaded and can be pushed up. If the Blending Jar is not easily removed, rock gently and lift. Do not twist.

8. For each Blending Jar, turn the Blending Jar upside down and unscrew the Jar Base (counter-clockwise to the left). Carefully remove the Blending Blade, and Blending Blade Sealing Ring (Figure 8)

WARNING: THE BLENDING BLADE IS SHARP.

HANDLE WITH CARE.

9.

10. Blending Jar Lids, Blending Jars, Blending Blade, Blending Blade Sealing Ring and Jar Bases can be safely washed in the top rack of your dishwasher.

Use only top rack. Failure to do so can result in damage.

11. The Ice Reservoir Lid, Ice Melt Reservoir, Ice Reservoir, Shaving Paddle, Ice Hopper, Ice Deflector Blade Assembly, Shaving Blade and Ice Melt Reservoir are only exposed to ice and water, so they need only be rinsed with soap and warm water and allowed to air dry.

12. Inspect and clean under Ice Chute with a hot damp cloth.

13. Use a damp cloth to clean the outside of the unit.

WARNING: UNPLUG UNIT BEFORE CLEANING.

Figure 5

Figure 6

Figure 7

Figure 9 Figure 8

-11-