4. Press the two Ice Hopper release catches and lift the Ice Hopper to remove (Figure 5).
PLEASE FOLLOW THE INSTRUCTIONS BELOW TO
SAFELY REMOVE THE SHAVING BLADE ASSEMBLY
FROM THE ICE HOPPER.
5. Unscrew plastic ring counter clockwise (to the left) in front of shaving blade and remove, then remove the Shaving Blade and store in a safe place.
(Figure 6).
BE SURE TO RINSE THE SHAVING BLADE AND DRY
THOROUGHLY BEFORE STORING.
6. Carefully lift the Blending Jar straight up to remove. The Ice Chute is
7. Turn the Blending Jar upside down and unscrew the Jar Base. Carefully remove the Blending Blade, and Blending Blade Sealing Ring.
WARNING: THE BLENDING BLADE IS SHARP.
HANDLE WITH CARE.
8. To remove the Ice Melt Reservoir hold the unit still and pull straight out on the handle.
9. Blending Jar Lid, Blending Jar, Blending Blade, Blending Blade Sealing Ring and Jar Base can be safely washed in the top rack of your dishwasher. Use only top rack. Failure to do so will result in damage. The Ice Reservoir Lid, Ice Reservoir, Shaving Paddle, Ice Hopper, Ice Deflector Blade Assembly, Shaving Blade and Ice Melt Reservoir are only exposed to ice and water and they should be rinsed with soap and warm water and allowed to air dry.
10. Use a damp cloth to clean the outside of the unit.
WARNING: REMOVE BATTERY BEFORE CLEANING.
DO NOT USE SOLVENTS. NEVER IMMERSE THE UNIT
IN WATER.
Figure 5
Figure 6
DEFLECTOR