INSTALLATION
TRANSMITTER
1.Plug the supplied 8V AC/DC power adaptor in the DC jack located on the rear of the transmitter.
2.Connect the supplied 8V AC/DC power adaptor to an electrical wall outlet. The Power LED then glows.
3.The transmitter can be connected to audio output jack of TV, Monitor, VCR, Radio, CD, MP3, VCD or DVD players with the cables provided.
Having finished the above simple wiring, Signal LED glows when the transmitter detects audio input signal played from the source.
SPEAKER RECEIVERS
1.Remove the door of the battery compartment.
2.Insert 6 pieces of ‘AA’ size ALKALINE batteries into the battery compartment with correct polarity under the speakers, then replace the door of battery compartment, or connect the provided AC/DC 9V Adaptor to the DC input jack under the speakers, then plug it to the wall AC outlet.
