Mark Levinson N28 manual Rear panel, Outputs Inputs

	OUTPUTS						INPUTS
BALANCED MAIN			POWER		CD		AUX 2
RIGHT	LEFT		SUPPLY	RIGHT	LEFT	RIGHT	LEFT
			INPUT	PUSH	PUSH	PUSH	PUSH
	MAIN	TAPE 1	TAPE 2				TAPE 1	TAPE 2	AUX 3	TUNER	PHONO/ AUX 1

	7		4	2
8	6	5	3	1

LEFT

GND

RIGHT

PRECAUTION

Rear panel

Disconnect all associated equipment from the AC mains BEFORE making any signal connections and applying power to the Nº28.

Note: All left-channel RCA-type inputs and outputs are at the top of the rear panel, and all right-channel RCA-type inputs and outputs are at the bottom of the rear panel.

1PHONO/AUX 1

If your Nº28 is equipped with the phono option, connect your turntable's right-channel and left-channel signal leads to these inputs. Connect the tonearm ground lead to the GND binding post next to the inputs.

If your Nº28 isn't equipped with a phono option, these inputs will accept signal leads from any line-level source equipment.

2TUNER

Accepts right-channel and left-channel signal leads from a tuner or other line-level source equipment.

3AUX 3

Accepts right-channel and left-channel signal leads from line-level source equipment.

4TAPE 1, TAPE 2 (INPUTS)

Accept right-channel and left-channel signal leads from the tape- output connectors of a tape machine. These inputs can also be used with other line-level source equipment.

5AUX 2, CD

Accept right-channel and left-channel balanced signal leads from a CD player or other source equipment with balanced output.

The pin assignments of these XLR-type female input connectors are:

PUSH

		Pin 1: Signal ground
2	1	Pin 2: Signal + (non-inverting)
		Pin 3: Signal – (inverting)
3

Connector ground lug: chassis ground

2