Mark Levinson N28 manual Voltage selection, Indication

PLS-228 bottom-panel label

Voltage selection

The PLS-228 is factory-set (internally) for 100V, 120V, 200V, 220V, or 240V AC mains operation @ 50 or 60Hz. Make sure that the label on the bottom of the PLS-228 indicates the correct AC operating voltage for your location.

PLS-228 POWER SUPPLY

	AC INPUT
	WARNING: BEFORE ATTEMPTING TO
	OPERATE THIS DEVICE, REFER TO
	OWNER'S MANUAL FOR PROPER
	OPERATING INSTRUCTIONS AND SAFETY
Voltage	PRECAUTIONS. HAZARDOUS VOLTAGE
	AVAILABLE INSIDE; DISCONNECT AC~
indication	MAINS CABLE BEFORE REMOVING COVER.
		OPERATING VOLTAGE:
	90 – 110VAC~		210 – 240VAC~
	105 – 125VAC~		230 – 250VAC~
	180 – 220VAC~		~50 – 60HZ
		100 – 120VAC~
	MAINS	2A SLO–BLO 250VAC 3AB
	FUSES:	200 – 240VAC~
		1A SLO–BLO 250VAC 3AB

SERIAL NO.

DESIGNED AND MANUFACTURED IN U.S.A. BY

MADRIGAL AUDIO LABORATORIES INC.

If the voltage indicated is incorrect, see your Mark Levinson dealer.

If you wish to change the AC operating voltage of the Nº28/PLS-228, see your Mark Levinson dealer.

The Nº28/PLS-228 can be powered by a normal 15-ampere AC mains line. If other devices are also powered from the same AC line, their additional power consumption must be taken into account.

5