Mark Levinson N33H Specifications, Rated power output, Frequency response Signal-to-Noiseratio

Rated power output:

Frequency response: Signal-to-Noise ratio:

Input impedance:

Voltage gain:

Input sensitivity:

Power consumption: Mains voltage:

Overall dimensions: Shipping weight:

Connector complement:

Output impedance:

Specifications

The correlation between published specifications and performance is unreliable. Measurements of your amplifier yield excellent results by any standards. However, only those specifications that apply to its actual operation are included here.

All specifications are subject to change at any time.

•34.6 Vrms (150 W) @ 8Ω

•34.6 Vrms (300 W) @ 4Ω

All of the above power ratings were measured as continuous (rms) power from 20Hz–20kHz with no more than 0.3% THD.

•Within 0.2 dB from 20Hz to 20kHz

•–75 dB CCIR

•100kΩ (balanced)

•50kΩ (unbalanced)

•26.8 dB

•1.59V (full-rated output)

•360W in idle; 130W in standby

23

•Determined by the requirements of the country for which the unit was manufactured; cannot be reset by dealer or user

•See “Dimensions”

•220 pounds (100 kg)

•Four custom binding posts

•One 3-pin XLR balanced input connector

•One RCA input connector

•Two 1⁄8" mini-jacks for remote turn-on

•Two Mark Levinson communications ports on RJ-11

•One captive high-current AC receptacle

•Less than 0.05Ω from 20–20,000Hz