Mark Levinson N33H loudspeaker binding posts outputs, NEVER short-circuitpower amplifier outputs

Caution!

Caution!

5. loudspeaker binding posts (outputs)

Provide audio output. Two pair of custom-made, gold-plated, high-current binding posts labeled + (positive) and – (nega- tive) are included. Positive binding posts are red; negative binding posts are black.

These binding posts are designed to facilitate high pressure, high contact area connections without the use of tools such as nut drivers. A simple finger-tightening actually yields higher contact pressure than traditional hex binding posts. There is no need to exert unusual effort when tightening.

NEVER connect power amplifier outputs to any component other than a loudspeaker.

NEVER short-circuit power amplifier outputs.

NEVER connect power amplifier outputs to another power amplifier’s outputs.

For best performance, use high-quality loudspeaker cables with either spade or hook lugs.

13

Spade Lug Hook Lug

•Connect the + (positive) binding posts on the Nº33H to positive inputs on the associated loudspeaker.

•Connect the – (negative) binding posts on the Nº33H to negative inputs on the associated loudspeaker.

DO NOT OVERTIGHTEN the Nº33H binding posts. Tight, high- contact pressure connections can be achieved with finger-tight- ening.

DO NOT FORCE the Nº33H binding post “wings” up and over a bent or oversized connector. Doing so may result in binding post damage. If the connector obstructs “wing”-turning, slide it into place when the binding post opening provides a snug fit. Then, use quarter-turns to tighten the connection as needed.