Electric/Hydronic
Baseboard Heaters
(Model D)
FILE #E37116
Installation & Maintenance Instructions
Dear Owner,
Congratulations! Thank you for purchasing this new heater manufactured by a division of Marley Engineered Products. You have made a wise investment selecting the highest quality product in the heat- ing industry. Please carefully read and follow the installation and maintenance directions shown in this manual. You should enjoy years of efficient heating comfort with this product from Marley Engineered Products... the industry’s leader in design, manufacturing, quality and service.
... The Employees of
Marley Engineered Products
|
|
|
| ! | WARNING |
|
|
| |
|
|
|
|
|
|
|
|
|
|
Read Carefully - This instruction sheet contains vital infor- |
| per, paperboard or low | density fiberboard surface. Do | ||||||
mation for the proper installation, use and efficient opera- |
|
| not install vinyl drapes or vinyl blinds above heater. | ||||||
tion of the heater. Carefully read the manual before instal- |
| 4. | Do not recess heater in wall. |
|
|
| |||
lation, operation, or cleaning of | the | heater. Failure | to | 5. | The installation must comply with applicable local, and | ||||
adhere to the instructions could | result | in | fire, electric |
| National Electrical Code and utility requirements. | ||||
shock, death, serious personal injury or property damage. |
| 6. | Do not remove or |
|
| ||||
Save these instructions and review frequently for continu- |
| 7. | To reduce the risk of fire, do not | store or | use | gasoline | |||
ing safe operation and instructing future users. |
|
|
| or other flammable vapors and liquids in the vicinity of | |||||
WARNING: HAZARD OF FIRE OR ELECTRICAL SHOCK. |
| the heater. |
|
|
| ||||
1. Keep all electrical cords, foam filled articles, drapes, | 8. Personal injury or death could | result | from | electric | |||||
bedding and other household furnishings away from |
|
| shock. Disconnect all power to heater at main panel | ||||||
contact with heater. It is | recommended | all items | be |
| before attempting to install or service this heater. | ||||
| kept a minimum of six (6") inches (152mm) from heater. | 9. Supply | voltage must |
| be the same as heater voltage. |
2. | Do not install baseboard heater below electrical con- | Check heater nameplate and supply voltage before | |||
| venience receptacles (outlets). | energizing. |
|
| |
3. | Do not install baseboard heater against vinyl wallpa- | 10. Supply | wiring must be suitable for 90°C. | ||
SAVE THESE INSTRUCTIONS
1
