emitters to the IR Receiver of the equipment
you want to control. The extender has three IR
emitters, so you can control up to three
devices. Never cut off an IR emitter! This may
harm your PowerMid®.
Some satellite receivers require more careful
positioning of the Powermid system. If any
difficulty is encountered, try to move the
PowerMid® Receiver a little in various positions
until it operates correctly.
Note: The Transmitter and Receiver will most likely be in different rooms (up to 25 meters
away). The range is depending on:
• The number of floors and walls the signal has to travel through and the materials these
walls and floors are made of.
• Other 433MHz sources (e.g. wireless head phones, wireless speakers) can effect the ran
of the PowerMid®. The best range will be achieved when these sources are switched o
while using the PowerMid®. Cordless telephones will not affect the PowerMid®.
4MARMI
manual_powermid_dualpower 05-06-2003 10:38 Page 4