2.Connect the power adapter to the receiver and plug the adapter into a wall socket.
3.Connect the receiver to your TV as shown below.
You can connect another device (DVD, VCR, satellite receiver, etc.) to the input (6) on your receiver. If you switch off the receiver with button (1), the image of your device will be shown. If you switch on the receiver, the image of your device will disappear and the camera image will be shown.
AV output of your device
AV device
Scart cable
Receiver
AV input
AV output. To the Scart input of your TV
The factory setting of the receiver is Channel 1. The switch for the channel setting can be found on the back of the receiver (8).
6 | MARMITEK |
