1Product Overview
The
2Features
•
•Multiple format acceptance for virtually any analog or digital video signal
•Display PC Signals to XGA 1024x768
•ColorMatch Conversion™ with SMPTE/EBU color space emulation of CRT
•Color temperature preset for D65
•HyperProcess™ motion interpolation of interlace images
•On screen display of input status, formats, and menu functions
•Pixel to Pixel™ native resolution display
•Ready to mount – all brackets are factory installed
•Lightweight – 75% lighter than CRT models
•Settings memory restores active state with power off/on cycle
•Underscan plus H & V delay
•Blue only (Blue Gun) for adjustment to SMPTE color bars
•Includes
•Three LEDs (Red, Green, Amber) produce 7 different tally indications on each screen
•Dry erase label for each screen
3 Video - Screen Formats and Frame Rates All signal types and frame rates are automatically detected
•525
•480P (Progressive)
•576P (Progressive)
•
•1035i - 59.94i, 60i (Interlaced)
•1080i x 1920 – 50i, 59.94i, 60i, 23.973P, 24P, 25P, 29.97P, 30P, 24psf, 23.97psf
4Electrical Specifications
Screen Aspect | 4:3/16:9 switchable |
Display (Viewing Area) | 10.4 Inch diagonal (211.2mm w x 158.4mm h) |
Viewing Angles | 130° H x 120° V |
Resolution (RGB Dots) | 800H×RGBx600V (1.44 million pixels) |
Color Depth | 262,000 Colors |
Dot Pitch | .213mm square pixel |
Contrast Ratio | 350:1 |
Pixel Response | 10ms rise/25ms fall |
Brightness (in cd/m²) | 500 cd/m² |
Backlight | Field Replaceable CCFL (50,000 hour half life) |
LCD Screen Treatments | Anti Reflection, Anti Glare, Hardcoat |
Estimated MTBF | 5 years of 24/7/365 operation |
System | NTSC/PAL with auto recognition |
Inputs | HDSDI/SDI (SMPTE259M, 292M) |
| YPrPb Component (3 BNC) |
| Composite Video PAL/NTSC auto detect (BNC) |
| |
| XGA 15Pin |
| DVI 27 (Pin |
| Tally |
Active Outputs | HDSDI/SDI (SMPTE259M, 292M) |
| YPrPb Component (3 BNC) |
| Composite Video PAL/NTSC auto detect |
Color temperature | D65 and User Adjustment |
Color Gamut | |
Luma Linearity | Typical +/- 3% with 5 IRE increments (0 to 10 IRE) |
Power Required | 10.8 to 13.2 VDC |
Power Consumption | Approx. 40 watt nominal |
Operating temperature | 32° F to 120° F (0° C to 50° C) |
Storage temperature | |
Compliance | ₠, |
RoHS WEE / Environmental | Do not dispose. Return to Manufacturer or Authorized Recycle Facility |
| |
2 |
9Menu Functions
1.Power On/Off Button
Illuminates Red when system power is present. Illuminates Green when monitor is ON.
2. Source Selection Buttons
Video - Composite NTSC or PAL. Composite video must comply to
YPrPb - Analog Component color difference signals for Standard Definition (YCrCb) or High Definition (YPrPb). VGA - Analog PC.
DVI - Digital Computer or Video Signals. Includes HDCP for use with HDMI originated signals. HDSDI - Digital Input for Standard Definition
3. Pixel to Pixel Function
As the native LCD displays of the
For
For 1080 line HD based images, pixel to pixel will appear as cropped 800x600 (4:3 aspect) starting from the center of the image. 240 lines top, 240 lines bottom, 560 pixels left and 560 pixels right will be cropped.
For 720 line HD based images, pixel to pixel will appear as cropped 800x600 (4:3 aspect) with 60 lines from the top and 60 lines from the bottom cropped. Horizontally, 240 pixels will be cropped from each edge.
3. Menu Enable and navigation
Access menu functions by selecting the MENU button. Use UP / DOWN to navigate and
SELECT to enable or disable the function
Note: Source selection is disabled when in menu mode.
Color Temperature
Simulates normal daylight conditions.
USER - When activated manual adjustment is performed by selecting
Adj. Color Gain or Adj. Color Bias
When in adjust mode use UP/DOWN to change values. Use SELECT to cycle RED, GREEN, and BLUE mode. Exit to the main menu by pressing MENU.
Left Line= Increase of Gain | Right Line= Increase of Bias |
Center Line = D65 (Default) | Center Line = D65 (Default) |
Right Line = Decrease of Gain | Left Line = Decrease of Bias |
Level Set-up
SELECT between 7.5 IRE for NTSC signals and 0 IRE for NTSC Japan and PAL signals. 7.5 mode will enable a digital black offset of the onscreen images for improved Blacks.
Color Bar
Use to SELECT internal test signal of full field color bars that is available for confirmation of LCD operation. This function will disable input selection until cycled off.
H/V Delay
Use to SELECT display of horizontal and vertical blanking areas.
Not available for all signal types.
Under Scan
Use SELECT to reduce the display area with expansion beyond active video. Note that the
Marshall Electronics |
| 7 |
| ||
|
|
|