Marshall

V-R44P Instruction Sheet

Broadcast Multimedia Division

http://www.LCDRacks.com e-mail: sales@mars-cam.com

The V-R44Pis a rack mountable unit that offers four 4" high-resolution active matrix LCD panels. Each of the four 480

×234 pixel screens has it's own set of controls for color, tint, contrast, and brightness. Each panel has it's own input with loopthrough capability, a self-powered 3 color tally system and auto-recognition of NTSC or PAL video formats. This unit is only 2 rack spaces high, and can be tilted up to 90 degrees while rack mounted, making it the smallest video monitoring system of its kind. Like all of the V-R Series, this unit is constructed of steel and aluminum, and comes com- plete with power supply and owners manual.

The operation of the V-R44P is fairly straightforward, however, please take note of the following:

1.The V-R44P has been designed to fit in a 2U space on your rack. It is important to use 4 screws to hold the ears to the rack. Be certain that the ears are aligned vertically, this is important to the tilt function (see back page).

2.Each LCD Panel comes with a protective plastic film that must be removed by carefully lifting the film from

the corner and peeling it off. Be certain not to apply any pressure on the LCD panels, they are fragile and can break. Scratched, cracked or broken LCD screens are not covered by our warranty.

3.The V-R44P uses 12VDC, 3.0amp regulated power. Be certain that these specifications are met when using a power supply other than the one supplied to you by Marshall Electronics. The center pin on the coaxial power connector for the V-R44P is the POSITIVE terminal and the outside ring is NEGATIVE. Any battery operation of the V-R44P must have this polarity configuration.

4.The Video inputs on the rear of the panel are 75 Ohm self-terminated. The loopthrough feature uses active components and is always active as long as power is supplied to the unit.

5.Each screen has the capability to automatically detect NTSC or PAL signals. Each screen is independently controlled allowing the user to view a PAL signal on one screen and an NTSC signal on the other.

6.The tally system on the V-R44P is accessed via the DB-15 connector on the back of the unit. The system works by closing the contacts between a ground pin and the corresponding LED pin. The system is self powered, DO NOT GIVE POWER TO THE PINS. The pinout is as follows:

Monitor 1

Green

Red

Yellow

 

 

 

 

Pin 1

Pin 2

Pin 3

PINS 4, 9 and 14 ARE

 

 

 

Monitor 2

Pin 6

Pin 7

Pin 8

 

 

 

 

 

 

 

COMMON GROUNDS

 

2.0”

 

Monitor 3

Pin 11

Pin 12

Pin 13

 

 

 

 

 

 

Monitor 4

Pin 5

Pin 10

Pin 15

 

 

 

 

Rear View

Side View

Display

Viewing Area

Dot Pitch

Picture

Inputs

Back Light

Dimensions

Power

Elements

Consumption

 

 

 

 

 

 

4” LCD

3.23" × 2.43"

0.171mm x

480H x 234V

NTSC/PAL auto

300 candle

19.125W x

12 VDC

Active Matrix

each panel

0.264mm

 

recognition

luminance

3.43H x 2.0D

3.0 Amps

Page 1 Page 2
Page 1
Image 1
Marshall electronic V-R44P instruction sheet Marshall, R44P Instruction Sheet, Broadcast Multimedia Division
Page 1 Page 2

V-R44P specifications

The Marshall Electronics V-R44P is a 4.3-inch high-resolution LCD monitor that has captured the attention of professionals in various fields, including broadcast, production, and videography. Known for its versatility and lightweight design, the V-R44P is an ideal companion for both on-location shoots and studio environments.

One of the standout features of the V-R44P is its compact size. Weighing only a fraction of a pound, this monitor can easily be mounted on cameras or rigs without adding significant bulk. The 4.3-inch display boasts a resolution of 800x480 pixels, ensuring sharp and clear images that are vital for critical viewing tasks. Whether you are focusing on a subject, framing a shot, or checking color accuracy, the V-R44P provides reliable visuals that meet the demands of professionals.

The monitor is equipped with various input options, including HDMI and composite, making it compatible with a wide range of devices. This flexibility is further enhanced by its ability to support various signal formats, allowing users to connect it to different cameras and playback devices seamlessly.

One of the key technologies utilized in the V-R44P is its advanced image processing capabilities. This includes features such as peaking, false color, and zebra patterns, which assist users in achieving precise focus and exposure levels. These tools are essential for ensuring high-quality images, especially when working under challenging lighting conditions.

Portability is another significant characteristic of the V-R44P. It comes with both battery and AC power options, giving users the freedom to choose the most convenient power source for their shooting environment. The built-in speakers and integrated headphone jack also facilitate audio monitoring, ensuring that sound professionals can keep track of audio levels during production.

Additionally, the V-R44P features a user-friendly interface that allows for easy navigation of settings and functions. This accessibility ensures that users can quickly adjust configurations without pulling focus from the creative process.

In conclusion, the Marshall Electronics V-R44P is an outstanding compact monitor that combines portability, advanced technologies, and versatility. With its impressive features and robust performance, it is an excellent choice for professionals seeking reliability in their visual monitoring solutions. Whether on a film set, at a live event, or in a studio, the V-R44P delivers the high standards necessary for modern video production.
Top Page Image Contents