Directed Electronics Ready Remote manual Main harness H1, 8-pin connector

main harness (H1), 8-pin connector

___
	BLUE	(-) 200mA Status Output
H1/1

H1/2

H1/3

H1/4

H1/5

H1/6

H1/7

H1/8

___

___

___

___

___

___

___

VIOLET/WHITE	Tachometer Input (optional)
BROWN	(+) Brake Switch Shutdown Input
GRAY	(-) Hood Pin Shutdown Input
BLACK	Ground
WHITE/BLUE	(-) Remote Start Activation Input
LT. GREEN/BLACK	Factory Alarm Disarm/RAP Cancellation

WHITE (+/- selectable) Parking Light Flash Output (optional)

Use the following wiring guidelines for the H1 harness.

Pin #	Wire Color	Note
H1/1	Blue	Required when using a bypass module or a
		(-) 3rd ignition output.
H1/3	Brown	This wire must be connected.
H1/7	Lt. Green/	Use if the vehicle is equipped with a factory
	Black	alarm disarm or for retained accessory power
		cancellation (RAP).

8 © 2 0 0 6 D i r e c t e d E l e c t r o n i c s