To determine what bypass module your vehicle requires, use the
➜
step 10
Learning the remote
The system comes with one programmed transmitter. The receiver can store up to 4 different transmitter codes in memory. Additional transmitters (part no. 26131) can be ordered by contacting your local dealer at
The following is the basic sequence of steps to remember whenever programming this unit:
warning! In the following procedure do not activate the remote start feature with the remote. This feature will be tested in the next step.
1. Fuses. Be sure to place the two
2. Key. Turn the ignition to the ON position. The parking lights will immediately turn on to indicate transmitter learn mode. After 5- seconds the parking lights will turn off and then turn back on to indicate ready to learn
mode.
© 2 0 0 6 D i r e c t e d E l e c t r o n i c s | 45 |
