Directed Electronics Ready Remote manual Control module programming

control module programming

Dependent on the vehicle, use the following data with the instructions to program your system. These wire loops are found at the side of the control module.

Door Lock Pulse Duration (WHITE) - Some European vehicles, such as Mercedes-Benz and Audi, require longer lock and unlock pulses to operate the vacuum pump. Programming the system to provide 3.5 second pulses will accommodate door lock interface in these vehicles. The default setting is 0.8 second door lock pulses. See Mercedes-Benz and Audi - 1985 and Newer (Type E Door Locks section) diagram.

Uncut – 0.8 seconds

Cut – 3.5 seconds

Double Pulse Unlock Single Pulse/Double Pulse (GREEN) - Some vehicles require two pulses on a single wire to unlock the doors. When the double pulse unlock feature is turned on, the H2/6 BLUE/BLACK wire will supply two pulses instead of a single pulse. This makes it possible to directly interface with double pulse vehicles without any extra parts.

Uncut – single pulse

Cut – double pulse

50 © 2 0 0 6 D i r e c t e d E l e c t r o n i c s