➤The climate control system does not work while the unit is operating the vehicle.
Either the wrong accessory wire is being energized or more than one ignition or accessory wire must be energized in order to operate the climate control system.
➤The remote start will not activate.
Check to ensure that the hood is not open and that the brake pedal is not depressed.
Check harnesses and connections. Make sure the harnesses are fully plugged into the remote start module. Make sure there are good connections to the vehicle wiring.
Check voltage and fuses. Use a meter and check for voltage between the RED wire and the BLACK ground wire. If you have less than battery voltage, check both 30A fuses on the main power wires. Also make sure that the ground wire is going to a good
➤The remote start will activate but the starter never engages.
1.Check for voltage on the purple starter wire two seconds after the remote start becomes active. If there is voltage present, skip to Step 4. If there is no voltage present, advance to Step 2.
2.Check the 30A fuses.
3.Does the vehicle have an immobilizer? Some immobilizer systems will not allow the vehicle to crank if active.
4.Check connections. The two red heavy gauge input wires should have solid connections.
© 2 0 0 6 D i r e c t e d E l e c t r o n i c s | 61 |
