➜
step 2
Constant Power and Ignition wires
Almost all power and ignition wires can be found behind the key cylinder under the lower drivers side dash panel. Using the appropriate hand tools, remove the lower dash panel using care not to break any parts. If the panel does not come off easily check for any additional screws you may have missed.
warning! On vehicles with air bags or sup- plemental restraint systems (SRS) you may notice a bright yellow tube with small wires in it marked SRS underneath the steering column near the key cylinder. DO NOT tamper or unplug these for any reason to prevent costly damages to your vehicle or personal injury. Tampering may cause unintended deployment of airbags.
Once the lower dash panel has been removed, locate the ignition harness at the back of the key cylinder. This is usually a group of thicker wires. With the ignition harness exposed, use your LED tester to find your power and ignition wires.
Place the black lead of the test probe to a clean metal surface in
14 | © 2 0 0 6 D i r e c t e d E l e c t r o n i c s |
